How to make good soap bubbles without glycerin. Giant big soap bubbles, tips for making your own solution

You can spend a quiet evening of experiments, you can have a fun competition, or you can have a noisy pampering for kids ... By the way, how many adults can walk past children blowing soap bubbles and not show "class"?

What is important to know in order to make soap bubbles at home Fine?

Of course, the main thing is the solution and what sticks (tubes, frames) for soap bubbles you use. Below we give 7 recipes for soap bubble solution. You can choose the one that suits you best, but do not be surprised: you may have to "tailor" it to your conditions. Let some helpful tips help you.

The main secret of success!

The main condition for preparing a good solution is the use of high-quality water. If the water is too hard, the solution will be of poor quality: the bubbles will be small or they will not be blown out at all. We advise you to take drinking non-carbonated or filtered water. Good solutions are obtained on boiled or melted water. Applying good water you multiply your chances of success!

Useful tips for those who make soap bubbles at home:

• The less impurities (perfume and other additives) in the soap or other detergent used to prepare the liquid, the more reliable the result.
• How to make the solution denser, and the quality of the bubbles better? To do this, use glycerin or sugar dissolved in warm water.
• The main thing is not to overdo it with glycerin and sugar, otherwise it will be difficult to blow bubbles.
• A less dense solution forms less stable bubbles, but they are easier to blow out (suitable for babies).
• Many bubble buffs advise letting the solution sit for 12 to 24 hours before drinking.
• At the start, before blowing the bubble, you need to wait for a clean, solid film (on which you will blow), without additional small bubbles around the edges that sometimes occur. Bubbles must be carefully removed or wait until they disappear. And in general, it is advisable to avoid foam: insist, cool the liquid for soap bubbles - if only there was less foam.
• Wind and dust in the air are not helpers for soap bubbles.
• High humidity is a helper.

Solution for soap bubbles: recipes for all occasions

Classic solution of soap bubbles according to GOST

It was this recipe for soap bubbles that was used according to GOST to prepare a solution during our childhood.

Ingredients:

• Purified water - 100 grams
• Laundry soap or glycerin (unflavored) - 10 grams
• Glycerin pure - 20-30 grams

Cut or rub soap. The soap should completely dissolve. Flavored soaps cannot be used, it is necessary to use household or pure glycerin without additives. Strain the solution through cheesecloth.

Add glycerin to the mixture. First you need to add 20 grams, and try to blow bubbles, and if they do not work out, another 20 - 35 grams of glycerin is added to the mixture. Glycerin is needed pure form- the cream can not be used. It’s hard to do without glycerin - the bubbles will turn out to be “dry”, which will make them burst faster.

Recipe 1, simple: soap bubbles from dishwashing liquid

You will need:

• 1/2 cup liquid washing dishes
• 2 glass of water
• 2 tea spoons of sugar

Mix all ingredients thoroughly. Ready!

Can be used similar composition where glycerin is used instead of sugar:

• 2/3 cup dishwashing liquid
• 4 glasses of water
• 2-3 tablespoons of glycerin.

Thoroughly mix all the ingredients and put the mixture in a cool place for 24 hours. Glycerin can be purchased at any pharmacy.

To do multicolored bubble , add food coloring to the mixture (2-3 teaspoons for the entire volume or divide into parts to make bubbles of different colors).

Recipe 2, for the little ones: how to make soap bubbles from baby shampoo?

You will need:

• 200 ml baby shampoo,
• 400 ml of distilled (boiled, melted) water.

This liquid should be infused for a day, after which you should add:

• 3 tablespoons of glycerin or 6 teaspoons of sugar.

Recipe 3, Fragrant: Bath Bubbles

You will need:

• 3 parts bath foam
• 1 part water.

Recipe 4, original: soap bubbles with syrup

You will need:

• 2 cups dishwashing liquid
• 6 glasses of water
• 3/4 cup corn syrup

Recipe 5, cheap and cheerful: solution for soap bubbles from laundry soap

You will need:

• 10 glasses of water
• 1 cup grated laundry soap
• 2 teaspoons of glycerin (or a solution of sugar in warm water, you can - with gelatin).

You can get by with a combination of water and soap without additional additives (for example, if there is simply no glycerin). Soap grated on a grater should be poured into boiled water, and hot, and stirred to full soap dissolution. If the dissolution is difficult, you can slightly warm the mixture with continuous stirring. Do not bring to a boil!

And if you do not want to grate laundry soap, then use this composition:

• 100 ml liquid soap
• 20 ml distilled water,
• 10 drops of glycerin (after the foam settles, i.e. after about 2 hours. It is better to infuse the liquid in a cold place).

Recipe 6: extra strong soap bubbles for experimenters

You will need:

• 1 part concentrated sugar syrup(proportion: for 1 part of water 5 parts of sugar: for example, for 50 g of sugar - 10 ml of water),
• 2 parts grated soap
• 4 parts glycerin
• 8 parts distilled water.

With this solution, you can, for example, build various figures from soap bubbles by blowing them onto a smooth table surface.

Recipe 7: giant soap bubbles for a children's party

You will need:

• 50 ml glycerin,
• 100 ml dishwashing liquid,
• 4 teaspoons of sugar
• 300 ml of water.

A solution for giant soap bubbles can be prepared in a basin, and they are “blown out” using a gymnastic hoop or a frame specially twisted from a flexible material. Honestly, you don’t have to blow - rather, you have to wave the frame or slowly pull a large, strong bubble out of the basin.

What to blow? Tubes/frames/sticks for soap bubbles

As sticks for soap bubbles, you can use tubules of different diameters, frames, cocktail sticks (especially with a cross-shaped or fringed tip and bent “petals”), hollow blades of grass or pasta, dough cutters, funnels, you can buy at the store special guns for soap bubbles or just blow them through your fingers!

And if you are invited to a real soap bubble festival or arrange one for yourself, you can make original stick-frames with your own hands from wire and colored beads, for example, these:

Another one original idea- use to blow large soap bubbles ... plasticnew bottles !

If you have your own ways to make soap bubbles at home or articles on the topic (especially with photos!) - please share them in the comments!

The nature of thin-walled spheres is still an interesting topic for scientists. On the example of them unique properties various physical laws can be verified.

Soap film is considered one of the thinnest objects in the world. Its thickness is 5000 times less than a hair and tissue paper.

Under the influence of environmental factors: gravity, air pressure, the "life" of the water bubble is short - a few seconds. Because of this, there is even a comparison among the people frivolous person or an uncertain life situation with a soap bubble.

But if you put a spherical film in a vacuum, then it can stay there for more than a month. An American scientist managed to set a record: he kept a water balloon in glass jar about a year! But for this I had to create everything in a container physical conditions to maintain the integrity and balance of the thin film.

Why are they spherical?

The air bubble has a spherical shape, since according to the laws of physics, it takes on a minimum area for a given volume. This was proven as early as 1884.

In 2000, scientists confirmed this theory with the double bubble theorem. It lies in the fact that two bubbles that are combined with each other take the minimum area for a given volume.

During the blowing process, the shape of the ball is distorted by air currents. But after some time, the soap bubble will take on an ideal spherical shape.

The water ball is holding long time due to the surface tension of water. Due to this, the surface of the bubbles is an elastic film. Surface tension forces do not depend on the size of the bubble, if it is of the correct shape. But if for some reason the surface of the ball is deformed, then it loses its elasticity and quickly bursts.

The geometry of bubbles still excites scientists. During the study, it turned out that the thickness of the soap film at the bottom is thicker than at the top. This is due to the fact that under the influence of gravity, the layer of water moves down. This gives reason to state that the shape of the bubbles is not quite perfectly spherical.

Why are they iridescent?

The water ball is colorless for the first seconds of its "life", as it has a perfectly spherical shape. But then the water layer flows down under the action of gravity, and the bubble becomes irregular in shape with different wall thicknesses.

According to the laws of physics, there is an interference of light waves reflected from the inner and outer surfaces of the film. Therefore, the thin sphere acquires an iridescent color.

As the top of the film thins, the light waves will begin to overlap each other, resulting in a black bubble. The water ball bursts in the place of the greatest thinning.

Soap bubbles in the cold

As the study of this topic, scientists have established the physical conditions under which the bubbles retain their shape. for a long time. This happens in extreme cold.

When the air temperature drops to 0ºС, the surface tension forces increase, that is, the bubbles burst easily. However, if the level of the thermometer column creeps down to -7ºС and below, surface tension becomes minimal. Despite the fact that the volume of air inside the ball will decrease, this will not significantly affect the dimensions of the film.

If you start up a soap ball in winter, then the water layer in it will freeze already at a temperature of -7ºС. The thin film turns into a crust of ice. If it hits the floor, it won't shatter into a million crystals like glass Christmas tree decoration. Dents will only appear on it, and individual fragments will curl up into a tube.

Thus, a soap film frozen in the cold will not be brittle, but plastic due to its small thickness and the absence of tension forces.

Non-bursting soap bubbles can be obtained at a temperature of -20 ºС, -25 ºС.

Blowing out a soap solution under such conditions, the liquid scatters in different directions in the form of small crystals. They grow rapidly and at the same time unite into a single object. Millions of crystals that form a ball add up to one picture of amazing beauty, which can only be compared with frosty drawings on glass.

Widespread use of soap bubbles

Blowing water balloons is not only a favorite pastime for children. In fact, the properties of soap bubbles are widely used in industry.

The balloon, which is used in aeronautics and meteorology for weather forecasting, is the prototype of a soap bubble. As you know, inside the soap ball the air is always warmer than outside, so the bubbles rise up. Based on the same principle balloon, only the air inside it is heated artificially.

Astronomers use the example of soap balls to study the process of turbulence in the gaseous shells of planets. This is because the ratio of the film thickness to the bubble diameter is proportional to the ratio of the thickness of the gaseous atmosphere to the diameter of the planets.

Bubbles have also found their application in the oil refining industry. For oil refining various materials micelles are used - analogues of soap bubbles. Water and special reagents are added to purified oil. As a result of the reaction, bubbles filled with water are formed in the oil. Inside micelles also occur chemical reactions, which contribute to the processing of oil into organic substances: esters, acids, monomers.

Even the process of bursting bubbles is good for science. studying this phenomenon, scientists began to understand the process of cavitation - the formation of bubbles in a liquid. If this happens in water, then the pressure changes dramatically. Due to the impact force of the pressure drop, even massive iron elements can collapse: a ship's propeller or a pipeline.

Soap bubble generator and its varieties

Previously, children used to blow soap balls using elementary devices: a plastic stick with a hole inside, which they dipped into a container with soapy water.

Now, thanks to new inventions, there are various soap bubble shows. Such a spectacle captivates even adults.

Now invented special devices to get bubbles that "live" much longer than their predecessors. These devices are called generators. The essence of their work is simple: soap composition which is automatically blown out with air. Stencils of various shapes are inserted into the holes at the output of the generator, thanks to which air figures of various bizarre shapes and colors are obtained.

Generators are suspended and floor, which are controlled by a remote control. It is advisable to purchase such devices for large children's parties.

Main types of generators:

1. bubble master. This unit has 4 types of fans that rotate and raise the balls high into the sky. This device produces long-lasting bubbles that can be used both outdoors and at home.
2. Bubble Master BM-2000. This powerful unit is characterized by high performance: up to 15,000 bubbles per minute. It instantly fills the room with air figures, which creates a festive atmosphere. The tank is designed for 4 liters, which is automatically refilled.
3. Bubble Master BM-500 (DMX). This device combines all the advantages of the previous two generators. In addition, it has a wireless remote control. In 20 minutes, the device consumes only 1 liter of solution, while the tank volume is only 1.5 liters. Thus, this generator has high performance and small dimensions.

You can easily make soap bubbles at home by learning how to properly prepare the solution. Launching water balloons is always a holiday for children and adults!

How to make soap bubbles at home

The main task in obtaining bubbles is to ensure their durability. This can be done with correct solution for soap bubbles at home.

There are several basic recipes for making foaming liquid, as well as ways to blow soap balls.

How to make a solution or liquid

Soap bubbles are usually made at home with glycerin. This solution allows you to get water balls that are elastic and long term"life".

Recipe for soap bubble solution at home

• 800 ml of purified water;
• 200 ml dishwashing liquid;
• 100 ml of glycerin;
• 50 grams of gelatin and sugar.

Gelatin should be poured with water so that it swells enough. After that, drain off excess liquid. Dissolve sugar and gelatin in a water bath. These ingredients will give strength to water bubbles.

Then add purified water and the rest of the ingredients to the resulting mixture. Mix everything until a homogeneous mass is obtained, without foaming! If foam forms, the likelihood of getting bubbles will be minimized.

Homemade solution is absolutely harmless to the child, it will not cause allergies on delicate skin.

Do you want something interesting?

Bubble liquid recipe

• 600 ml boiled water;
• 300 ml of glycerin;
• 20 drops ammonia;
• 50 ml of powder of any detergent.

Mix all the ingredients and leave to infuse for 2-3 days. After that, the mixture is filtered and put in a cold place for 12 hours.

Such a solution is prepared a little longer than in the previous case, but the bubbles will turn out to be strong and large.

A good water ball should last at least 30 seconds. The quality of the prepared liquid can be checked as follows: dip your finger in soapy liquid, and then touch the soap bubble with it. If the ball does not burst from this, the solution is prepared correctly.

A classic tool for blowing bubbles is a straw - a cocktail tube. This tool was used 300 years ago, as evidenced by the painting of the French painter Jean-Baptiste Chardin "Soap Bubbles".

How to blow water balloons

1. Pour the solution into a flat plate, up to 20 cm in diameter.
2. Take a straw and blow out the air so that a bubble forms on the plate. Get a certain hemisphere.
3. Insert the tube inside the soap sphere and inflate another bubble, but smaller.

Giant soap bubbles

Other solutions for soap bubbles are used to fill the generator. After all, these elements must be distinguished by increased strength and large sizes.

Giant soap bubble solution:

• 800 ml of distilled water;
• 200 ml of dishwashing detergent;
• 100 grams of lubricant gel;
• 100 ml of glycerin.

Mix all ingredients without water until smooth. Next, heat the water and add to the mixture. Mix everything, avoiding the formation of foam.

To make soap bubbles large sizes without using a generator, the following materials are needed:

• 2 sticks;
• wool cord;
• bead;
• soapy liquid.

Production technology big bubbles:

1. Tie one end of the thread to the first stick.
2. Put a bead on the free end of the cord. IN this case it acts as a load.
3. After 80 cm, tie the thread to another stick.
4. The remaining piece of thread is tied back to the first stick. The result should be a triangle with two sticks and one bead at the vertices.
5. Lower the structure into the solution and hold it there for at least 1 minute.
6. Pull out the cord on outstretched arms, straightening the rods. It must be done smoothly. In the space between the threads, you should get a soapy masterpiece.

There is another simple method for getting big bubbles. To do this, you need to take two knitting needles and tie a woolen thread between them. Then dip the structure in a soapy solution so that the thread is well saturated, and then remove it all. By spreading and moving the spokes, you can get a real soap creation.

You can get large balls by blowing through a plastic funnel for pouring liquids.

Bubble painting

Soap balls can not only be thrown into the air - you can draw with them.

For drawing you will need:

• food coloring in bright colors;
• baby shampoo or dish detergent;
• plastic cups;
• water;
• container for paint;
• sticks for mixing paints;
• plastic tubes;
• album sheets;
• napkins.

Soap ball painting technology:

1. Cover the table with old newspapers and put on old clothes that you don't mind getting dirty.
2. In a plastic cup, mix paint, shampoo and water. Leave the solution overnight. Instead of food coloring, you can take acrylic paints or gouache. The main thing is that they are bright and saturated.
3. The next day, take out the solution and pour it into the paint tray.
4. Blow through a straw into the paint tray until a bubble forms.
5. Take a piece of paper and lower it onto the formed ball. The soap ball will burst, leaving a bright mark on the paper.
6. Take a tray with another paint and do the same process on paper.
7. After the sheet dries, it will become clear that the soap bubbles have formed pictures. Having fantasized, you can finish them to get figures or animals.

From the resulting drawings, you can make a holiday card or application.

Making soap bubbles at home is a fun activity. For children it is festive mood, and for adults - a reason to return to a carefree childhood!

Today, this fun is very popular not only among children, but also among adults. By blowing bubbles, you can have fun with family or friends. It will be even more interesting when there is a solution for soap bubbles prepared at home. It is made simply, you just need to know the recipe and follow the “production” technology. You can connect all the "home" to the process, especially children - for them it will be no less exciting than blowing bubbles.

How to make a solution of soap bubbles. Recipes

So, in order to prepare a “magic” liquid, you will need the most ordinary components that belong to the field of household chemicals.

On their basis, various

solutions, which then turn into bubbles of mesmerizing beauty. Experiment with a few recipes so you can make your own bubble solution when you feel like a party.

Solution recipes

Recipe #1: Soapy

For the composition, you will need the following ingredients (unit of measurement - parts):

Soap ordinary - 2;

Hot water - 8;

Glycerin - 4;

Sugar syrup - 1.

By mixing all the parts, you will get a solution for soap bubbles. At home, you can prepare this liquid in a different way.

Recipe number 2: With shampoo

You will need the following components:

Shampoo for children - ⅓ mug;

Do you want to please your child with big soap bubbles? Those that sell small ones and they are not enough for a long time? We wrote detailed instructions how to make soap bubbles at home with the tools that we always use at home.

To make soap bubbles at home, we need:

1. plain water(preferably distilled or boiled).

2. Dishwashing liquid (liquid).

3. Shampoo.

4. Sugar.

5. Laundry soap.

6. Glycerin (we buy at any pharmacy, without a prescription).

7. Ammonia.

8. A straw (a straw for cocktails or a regular tube).

Glycerol- exactly the remedy that makes the walls of the soap bubble stronger, and the bubble itself, respectively, more long-lived.

Note. We use distilled water.

Sugar. A spoonful of sugar so that the bubbles do not burst for a long time.

Instruction -

Soap bubbles recipe.First way.

Proportion: 1/6 glycerin, 1/6 liquid dishwashing detergent, 2/3 water. We mix and inflate our soap bubbles.

Soap bubbles recipe.Secondway.

We take any convenient large container (glass or bowl), pour 300 ml. water and add 100 ml. shampoo (we take any of your choice). Add 2 tablespoons of glycerin and 1 teaspoon of sugar. We mix everything thoroughly and enjoy the big soap bubbles with our own hands. There will not be many bubbles, but large ones, they fall for a long time and will not burst quickly.

Soap bubbles recipe.Thirdway.

We mix 300 ml. water, 50 ml. glycerin and 100 ml. liquid dishwashing detergent. We stir our ingredients well and admire the soap bubbles that you have prepared yourself. There will be a lot of bubbles, they quickly reach the floor and burst.

Soap bubbles recipe.Fourth way.

We take l any shampoo for children or ordinary 200 ml. mix with 400 ml. distilled water. We leave for a day to settle our solution. Then add 3 tablespoons of glycerin.

Soap bubbles recipe.Fifth way.

Ber yo m shampoo 100 ml. add 200 ml. warm water and 3 tablespoons of sugar. Cheap and cheerful bubbles at home are ready.

Soap bubbles recipe.Sixth way.

We mix 200 ml. shampoo, 200 ml. shower gel, 200 ml. liquid dishwashing detergent, 100 ml. water. We get a lot of big bubbles.

Soap bubbles recipe.Seventh way.

We mix the gel for intimate hygiene and distilled water (or plain water). It also makes good bubbles.

Soap bubbles recipe.Eighth way.

Pour 300 ml into a bowl. water, add 100 ml. glycerin, 10 drops of ammonia. In a separate container, grate 50 g of laundry soap and boil over a fire so that it dissolves faster. Add it to the main solution. Mix all ingredients. The solution should be infused for 2-3 days, then filter it and put it in the refrigerator for 12 hours before use. Soap bubbles prepared by this method take a long time, and the blowing effect is the same as by the first method, only the bubbles do not burst longer.

Video -Woh soap bubbles

898 0

Soap bubbles are a fun, exciting entertainment that adults and kids enjoy. Now it is not difficult to buy such a funny toy. But the liquid in it runs out pretty quickly, and instead of great childish joy, we see pouting lips. In order not to upset the crumbs that have played out, you can try to make the solution yourself.

How to make soap bubbles at home? What ingredients are required for this? More on this below.

The history of soap bubbles goes back several thousand years. During the excavations of Pompeii, wall paintings were found with people blowing bubbles through sticks. Similar drawings were also found in China.

The appearance of such fun is directly related to the invention and distribution of soap. Who came up with the idea of ​​blowing bubbles out of the foam is not known for certain. But in the second half of the 19th century in London they began to sell a special liquid with which you could get rainbow balls.

Initially, the bubbles were inflated through a thin straw. It was later developed special device(soap bubble generator), which he himself produced a large number of foam balls. Over time, such equipment began to be used in organizing festive events, in theaters, and on film sets.

Making baby bubbles

To prepare children's fun, you will need a solution and tubes through which rainbow balloons are blown. Soap bubbles must contain detergent, as well as water.

• It is best to prepare a foamy liquid with boiled water. It can be replaced with distilled.
• The soap used should contain as few impurities as possible, perfume fragrances.
• In order for the solution to turn out to be of high quality, and the bubbles to be strong, you need to add a little sugar and glycerin to the water.
• Before use, the resulting liquid should be kept for about 10-12 hours.
• If on the surface finished composition foam has formed, it must be removed, or the liquid should be set aside for a while in a cool place.

How to check the prepared solution for quality? A good iridescent bubble about 3 cm in diameter will last about half a minute. You can also check the strength of the ball by moistening your finger in the foamy liquid and gently touching it. If the soap bubble solution is prepared correctly, it will not burst.

Home appliances for blowing

On the shelves of modern stores you can find great amount various sets for soap bubbles. A variety of devices allow you to blow large, small and even giant soap bubbles. But at home, you can use improvised items or make them yourself.

Tubes or straws are suitable for blowing. To get larger bubbles, their edges on one side can be cut and then bent into a flower shape. Also suitable for regular plastic bottle with cut bottom. Some craftsmen blow foam balls through their fingers.

A convenient fixture is easy to make from ordinary wire. Beads are put on one end of it, and the other is wrapped in the shape of a circle or square. To get large balls, take two identical sticks and tie them together with a woolen thread. The thread is dipped into the solution, allowed to completely soak, and then, changing the position of the sticks, bubbles of various sizes are made.

bubble gun

On the shelves of modern children's stores, you can very often find pistols to create a whole cascade of rainbow balloons. The kids love these gadgets because they run on batteries and there is no need to blow bubbles, the gun will do everything by itself.

You just need to make sure that the foamy liquid does not end.

If it is still over, you can do it yourself at home. Dishwashing detergent is best for this purpose. It foams well, and the bubbles from it are small and bright.

Have to take:

• detergent 100 grams;
• pure water 300 grams;
• glycerin 50 grams.

All ingredients are well mixed and allowed to brew for about an hour. After this time, you can blow bubbles. If you didn’t like the result, then you can try to make soap bubbles without glycerin according to the same recipe.

Conditions under which soap solutions work

The film of air bubbles from soap is quite thin. That is why external and weather conditions greatly affect their quality. In clear, too sunny weather, the balloons may not inflate or burst immediately, and even a store-bought solution will not help. It is best to spend fun with a soapy solution in non-hot, humid weather. In the morning or in the late afternoon when the sun is so bright.

Air bubbles are excellent near open water or after rain.

If you plan to play indoors, you should turn off the air conditioners and eliminate even a small draft. In a dusty room, blowing balloons will also fail.

DIY soap bubbles: simple recipes

To prepare high-quality bubbles, you can use almost any detergent.

It can be:

• ordinary soap;
• dishwashing liquid;
• washing powder;
• bath foam;
• shampoo;
• shower gel.

By varying the amount of liquid, as well as foaming compositions, it is possible to create bubbles of different strength and size. Rainbow balloons will bring a lot of joy to your little ones.

Dishwashing liquid soap bubble recipe

The easiest way to make a solution for soap bubbles with your own hands is from dishwashing detergent. To do this, take half a glass detergent composition and distilled water. Both liquids mix well and add a teaspoon of sugar without a slide. After the solution is infused, you can start the blowing process.

Soap bubbles with glycerine

This recipe will also require detergent. You can take Sorti, Fairy or any other. So, 150 ml of distilled (boiled) water is mixed with 25 ml of glycerin, a quarter cup of dishwashing liquid. All ingredients are well mixed and sent for a day in the refrigerator. Air foam bubbles according to this recipe are strong and long-lasting.

Powder soap bubble liquid

This method of preparing the solution is a little more complicated and will take more time.

For him, you need to prepare:

• glycerin 300 grams;
• hot water 600 ml;
• washing powder 50 grams;
• alcohol ammonia 20 drops.

Pour all the ingredients into a selected container and mix well. ready mix leave to infuse for 2-3 days.

After that, the resulting liquid is filtered through gauze, then put in the refrigerator for 12 hours. All! A strong solution for children's fun is ready. You can blow bubbles. Even professionals at the bubble show use this composition.

Soap bubbles that don't burst

Since childhood, everyone has dreamed of rainbow bubbles that do not burst, but capricious balls immediately disappeared, as soon as you put your hand on them. Children like durable soap bubbles much more. At home, it is easy to prepare a good solution that will help you enjoy the fun longer than usual.

To create it, you need to prepare:

• sugar syrup 120 grams;
• soap shavings 200 grams;
• glycerin 400 grams;
• boiled water 800 ml.

Sugar syrup is prepared as follows: 50 grams of sand are mixed with 10 grams of water and mixed well. Next, chips, glycerin are added to it. After the mass has turned out to be homogeneous, water is gradually added to it and continue to mix. After 10 minutes you can blow non-bursting soap bubbles.

Recipe for big bubbles

If follow the following recommendations when preparing a solution, as a result, you can easily get huge rainbow balls. Distilled water is heated, poured into a container prepared in advance. It will take about 1 liter of clean liquid. Next, shower gel (about 200 ml), 25 grams of glycerin is added to the dishes. All ingredients are well mixed and infused for several hours.

To get large soap bubbles, you need a special device. You can also make it yourself. To do this, you need to prepare two sticks about 30 cm long, a cotton or wool rope about 50 cm and a nut.

A nut is strung on a rope, and its ends are tied to prepared sticks. The resulting device is lowered into the solution so that the tips of the sticks and the rope get wet. Next, it remains to straighten your arms and wave them. The result is a giant soap bubble.

Soap bubbles for children

Quite often, the compositions sold in stores begin to pinch their eyes when the kids are chasing soap bubbles. At home, you can prepare a quality solution for babies without tears.

For this you need:

• 200 grams of shampoo for children;
• 2 cups of boiled water;
• 3 tablespoons of granulated sugar;
• 2 spoons of glycerin.

Shampoo is well combined with water and left in cool place for 24 hours. After this time, sugar and glycerin are added to the solution. All ingredients are thoroughly mixed. You can use such soap bubbles in kindergarten.

Bath foam recipe

Good soap bubbles are obtained by adding liquid bath foam to the composition. To do this, take 1 part of water, 3 parts of liquid foam, mix everything well. You can blow balloons with any device, they turn out to be iridescent and smell pleasant.

Laundry soap with glycerin

Strong and long-lasting bubbles are made from ordinary laundry soap. To do this, a whole bar is rubbed on a grater and poured with boiled hot water in a ratio of 1 to 10. The resulting mixture is well stirred so that all the pieces dissolve.

Interesting games with soap bubbles

All of the above compositions are suitable not only for blowing flying bubbles. There is a lot of fun with a regular straw and a solution.

Here are some of them:

1. You need to take an ordinary flat plate, grease it with a foamy solution. Then, with the help of a tube, a bubble of large diameter is blown out and carefully disconnected from it. Then the tube is inserted inside the ball and another smaller one is blown out. The procedure can be repeated several times. The kid will definitely like these rainbow pyramids.
2. It is very interesting to blow bubbles in the cold. If the air temperature drops below -7 ° C, the balls will quickly freeze and remain lying on the snow.
3. With the help of such bubbles, you can draw whole pictures. To do this, the finished liquid is poured into several containers, then added to each food colorings or watercolors. A tube is lowered into the jar, a ball is blown out and applied to a prepared sheet of paper. Spots remain on the white canvas, which gradually form a whole pattern.
4. With air bubbles, you can arrange outdoor games. It's a lot of fun when kids try to keep flying balloons in the air. To do this, you just need to blow on them from below. Whoever allowed his bubble to fly longer won.
5. For older children, you can arrange a relay race. The guys are divided into two teams. Each of the participants blows the balloon, catches it on his tube. The child must carry this entire structure to the identification mark and back, and then pass the tube to the next in his team. The team that completes the task faster wins.

Blowing Safety

Blowing bubbles out of soap, although considered safe fun, also requires compliance with certain rules.

They should not be run near roads where motor vehicles move. Children or dogs chasing a rainbow ball can jump out under the wheels.

If they are inflated indoors, it is necessary to periodically wipe the floor, provided that it is made of linoleum or laminate. On the remnants of the solution, the crumbs can easily slip. Especially a lot of traces are left by the machine for soap bubbles.