How to make water for soap bubbles. How to make "shop" soap bubbles

The nature of thin-walled spheres is still an interesting topic for scientists. By the example of their unique properties, various physical laws can be confirmed.

Soap film is considered one of the thinnest objects in the world. Its thickness is 5000 times less than a hair and tissue paper.

Under the influence of environmental factors: gravity, air pressure, the "life" of the water bubble is short - a few seconds. Because of this, among the people there is even a comparison of a frivolous person or an uncertain life situation with a soap bubble.

But if you put a spherical film in a vacuum, then it can stay there for more than a month. An American scientist managed to set a record: he kept a water balloon in a glass jar for about a year! But for this it was necessary to create all the physical conditions in the container to maintain the integrity and balance of the thin film.

Why are they spherical?

The air bubble has a spherical shape, since according to the laws of physics, it takes on a minimum area for a given volume. This was proven as early as 1884.

In 2000, scientists confirmed this theory with the double bubble theorem. It lies in the fact that two bubbles that are combined with each other take the minimum area for a given volume.

During the blowing process, the shape of the ball is distorted by air currents. But after some time, the soap bubble will take on an ideal spherical shape.

The water ball is held for a long time due to the surface tension of water. Due to this, the surface of the bubbles is an elastic film. Surface tension forces do not depend on the size of the bubble, if it is of the correct shape. But if for some reason the surface of the ball is deformed, then it loses its elasticity and quickly bursts.

The geometry of bubbles still excites scientists. During the study, it turned out that the thickness of the soap film at the bottom is thicker than at the top. This is due to the fact that under the influence of gravity, the layer of water moves down. This gives reason to state that the shape of the bubbles is not quite perfectly spherical.

Why are they iridescent?

The water ball is colorless for the first seconds of its "life", as it has a perfectly spherical shape. But then the water layer flows down under the action of gravity, and the bubble becomes irregular in shape with different wall thicknesses.

According to the laws of physics, there is an interference of light waves reflected from the inner and outer surfaces of the film. Therefore, the thin sphere acquires an iridescent color.

As the top of the film thins, the light waves will begin to overlap each other, resulting in a black bubble. The water ball bursts in the place of the greatest thinning.

Soap bubbles in the cold

As the study of this topic, scientists have established the physical conditions under which the bubbles retain their shape for a long time. This happens in extreme cold.

When the air temperature drops to 0ºС, the surface tension forces increase, that is, the bubbles burst easily. However, if the level of the thermometer column creeps down to -7ºС and below, the surface tension becomes minimal. Despite the fact that the volume of air inside the ball will decrease, this will not significantly affect the dimensions of the film.

If you start up a soap ball in winter, then the water layer in it will freeze already at a temperature of -7ºС. The thin film turns into a crust of ice. If it hits the floor, it won't shatter into a million crystals like a glass Christmas toy. Dents will only appear on it, and individual fragments will curl up into a tube.

Thus, a soap film frozen in the cold will not be brittle, but plastic due to its small thickness and the absence of tension forces.

Non-bursting soap bubbles can be obtained at a temperature of -20 ºС, -25 ºС.

Blowing out a soap solution under such conditions, the liquid scatters in different directions in the form of small crystals. They grow rapidly and at the same time unite into a single object. Millions of crystals that form a ball add up to one picture of amazing beauty, which can only be compared with frosty drawings on glass.

Widespread use of soap bubbles

Blowing water balloons is not only a favorite pastime for children. In fact, the properties of soap bubbles are widely used in industry.

The balloon, which is used in aeronautics and meteorology for weather forecasting, is the prototype of a soap bubble. As you know, inside the soap ball the air is always warmer than outside, so the bubbles rise up. A balloon is based on the same principle, only the air inside it is heated artificially.

Astronomers use the example of soap balls to study the process of turbulence in the gaseous shells of planets. This is because the ratio of the film thickness to the bubble diameter is proportional to the ratio of the thickness of the gaseous atmosphere to the diameter of the planets.

Bubbles have also found their application in the oil refining industry. For processing oil into various materials, micelles are used - analogues of soap bubbles. Water and special reagents are added to purified oil. As a result of the reaction, bubbles filled with water are formed in the oil. Inside the micelles, chemical reactions also occur that contribute to the processing of oil into organic substances: esters, acids, monomers.

Even the process of bursting bubbles is good for science. By studying this phenomenon, scientists began to understand the process of cavitation - the formation of bubbles in a liquid. If this happens in water, then the pressure changes dramatically. Due to the impact force of the pressure drop, even massive iron elements can collapse: a ship's propeller or a pipeline.

Soap bubble generator and its varieties

Previously, children used to blow soap balls using elementary devices: a plastic stick with a hole inside, which was dipped into a container with soapy water.

Now, thanks to new inventions, there are various soap bubble shows. Such a spectacle captivates even adults.

Now special devices have been invented for obtaining bubbles that “live” much longer than their predecessors. These devices are called generators. The essence of their work is simple: a soap composition is poured into the hopper, which is automatically blown out with air. Stencils of various shapes are inserted into the holes at the output of the generator, thanks to which air figures of various bizarre shapes and colors are obtained.

Generators are suspended and floor, which are controlled by a remote control. It is advisable to purchase such devices for large children's holidays.

Main types of generators:

1. bubble master. This unit has 4 types of fans that rotate and raise the balls high into the sky. This device produces long-lasting bubbles that can be used both outdoors and at home.
2. Bubble Master BM-2000. This powerful unit is characterized by high performance: up to 15,000 bubbles per minute. It instantly fills the room with air figures, which creates a festive atmosphere. The tank is designed for 4 liters, which is automatically refilled.
3. Bubble Master BM-500 (DMX). This device combines all the advantages of the previous two generators. In addition, it has a wireless remote control. In 20 minutes, the device consumes only 1 liter of solution, while the tank volume is only 1.5 liters. Thus, this generator has high performance and small dimensions.

You can easily make soap bubbles at home by learning how to properly prepare the solution. Launching water balloons is always a holiday for children and adults!

How to make soap bubbles at home

The main task in obtaining bubbles is to ensure their durability. This can be done with the right bubble solution at home.

There are several basic recipes for making foaming liquid, as well as ways to blow soap balls.

How to make a solution or liquid

Soap bubbles are usually made at home with glycerin. This solution allows you to get water balls, characterized by elasticity and a long "life".

Recipe for soap bubble solution at home

• 800 ml of purified water;
• 200 ml dishwashing liquid;
• 100 ml of glycerin;
• 50 grams of gelatin and sugar.

Gelatin should be poured with water so that it swells enough. After that, drain off excess liquid. Dissolve sugar and gelatin in a water bath. These ingredients will give strength to water bubbles.

Then add purified water and the rest of the ingredients to the resulting mixture. Mix everything until a homogeneous mass is obtained, without foaming! If foam forms, the likelihood of getting bubbles will be minimized.

Homemade solution is absolutely harmless to the child, it will not cause allergies on delicate skin.

Do you want something interesting?

Bubble liquid recipe

• 600 ml of boiled water;
• 300 ml of glycerin;
• 20 drops of ammonia;
• 50 ml of powder of any detergent.

Mix all the ingredients and leave to infuse for 2-3 days. After that, the mixture is filtered and put in a cold place for 12 hours.

Such a solution is prepared a little longer than in the previous case, but the bubbles will turn out to be strong and large.

A good water ball should last at least 30 seconds. The quality of the prepared liquid can be checked as follows: dip your finger in the soapy liquid, and then touch the soap bubble with it. If the ball does not burst from this, the solution is prepared correctly.

A classic tool for blowing bubbles is a straw - a cocktail tube. This tool was used 300 years ago, as evidenced by the painting of the French painter Jean-Baptiste Chardin "Soap Bubbles".

How to blow water balloons

1. Pour the solution into a flat plate, up to 20 cm in diameter.
2. Take a straw and blow out the air so that a bubble forms on the plate. Get a certain hemisphere.
3. Insert the tube inside the soap sphere and inflate another bubble, but smaller.

Giant soap bubbles

Other solutions for soap bubbles are used to fill the generator. After all, these elements must be distinguished by increased strength and large sizes.

Giant Bubble Solution:

• 800 ml of distilled water;
• 200 ml of dishwashing detergent;
• 100 grams of lubricant gel;
• 100 ml of glycerin.

Mix all ingredients without water until smooth. Next, heat the water and add to the mixture. Mix everything, avoiding the formation of foam.

To make large soap bubbles without using a generator, you need the following materials:

• 2 sticks;
• wool cord;
• bead;
• soapy liquid.

Large bubble technology:

1. Tie one end of the thread to the first stick.
2. Put a bead on the free end of the cord. In this case, it acts as a load.
3. After 80 cm, tie the thread to another stick.
4. The remaining piece of thread is tied back to the first stick. The result should be a triangle with two sticks and one bead at the vertices.
5. Lower the structure into the solution and hold it there for at least 1 minute.
6. Pull out the cord on outstretched arms, straightening the rods. It must be done smoothly. In the space between the threads, you should get a soapy masterpiece.

There is another simple method for getting big bubbles. To do this, you need to take two knitting needles and tie a woolen thread between them. Then dip the structure in a soapy solution so that the thread is well saturated, and then remove it all. By spreading and moving the spokes, you can get a real soap creation.

You can get large balls by blowing through a plastic funnel for pouring liquids.

Bubble painting

Soap balls can not only be thrown into the air - you can draw with them.

For drawing you will need:

• food coloring in bright colors;
• baby shampoo or dish detergent;
• plastic cups;
• water;
• container for paint;
• sticks for mixing paints;
• plastic tubes;
• album sheets;
• napkins.

Soap ball painting technology:

1. Cover the table with old newspapers and put on old clothes that you don't mind getting dirty.
2. In a plastic cup, mix paint, shampoo and water. Leave the solution overnight. Instead of food coloring, you can take acrylic paints or gouache. The main thing is that they are bright and saturated.
3. The next day, take out the solution and pour it into the paint tray.
4. Blow through a straw into the paint tray until a bubble forms.
5. Take a piece of paper and lower it onto the formed ball. The soap ball will burst, leaving a bright mark on the paper.
6. Take a tray with another paint and do the same process on paper.
7. After the sheet dries, it will become clear that the soap bubbles have formed pictures. Having fantasized, you can finish them to get figures or animals.

From the resulting drawings, you can make a holiday card or application.

Making soap bubbles at home is a fun activity. For children, this is a festive mood, and for adults, it is a reason to return to a carefree childhood!

One of the most favorite pastimes for any age is soap bubbles. Their recipe has long been known and widely used by parents in order to turn the child's everyday life into a holiday. Today on the shelves of children's stores you can find a huge number of all kinds of jars for inflating rainbow bubbles, but their composition is very doubtful and unsafe for humans. Therefore, parents have to innovate and look for instructions on how to make homemade ones so as not to harm the health of their child.

There are quite a few options using a variety of ingredients to prepare the desired solution. In this case, all instructions and proportions should always be strictly observed in order to make beautiful and durable soap bubbles. The recipe must be from reliable sources. Otherwise, there is a risk that nothing will work out, and the children will be upset.

Key ingredients for soap solution

So, you will need the following components.

1. Dishwashing liquid. There is no exact brand that could be singled out as the ideal option for creating a solution for soap bubbles. It is worth trying something that you use on a daily basis.
2. Soap. Economical is best.
3. Water. This component should be carefully considered. Tap water is not always good for soap bubbles. It contains too many different salts. You should first boil it and let it stand for several hours.
4. Glycerin solution. This is the component that is responsible for the strength, color and size of the bubble. Glycerin is sold in pharmacies of the city. One bottle is enough for several times. As a rule, a teaspoon of glycerin is added to one liter of soap bubble solution. But there are exceptions.

Popular Recipes

Consider the most common options.

Recipe #1

The most popular and does not require special ingredients. All you need is a piece and water. These components can be found in any home. Soap should be ground on a coarse grater or cut into small pieces and dissolved in warm water. To speed up the process, the resulting mixture can be put on low heat and stirred until a homogeneous mass is obtained.

Recipe number 2

This is one of the easiest ways to make soap bubbles at home with kids. This will require: 100 g of dishwashing liquid, 300 ml of water and 50 ml of glycerin. You need to mix all the ingredients. Done, you can start entertaining the kids.

Do not use tap water, because it contains too much salt, this negatively affects the film.

Glycerin is needed in order for the bubbles to be strong.

Recipe number 3

For this option for making a solution, you will need several days.

Required: 300 ml of hot boiled water, 150 ml of glycerin, 10 drops of ammonia, 25 g of washing powder. All this must be thoroughly mixed and left alone for 2-3 days. After the time has elapsed, the solution must be filtered and sent to the refrigerator for 10 hours. The bubbles are very large and strong. No worse than those that are allowed by professionals on holidays.

If you take the matter seriously, then with the help of the created liquid you can arrange a real show of soap bubbles. Such a performance will decorate any holiday, even if it is an adult party, it will definitely not be boring.

Recipe number 4

This is a variant of creating a liquid for inflating large bubbles.

This will require:

• 1.6 liters of water;
• 0.5 l dishwashing liquid;
• 0.2 l of glycerin solution;
• 100 g of sugar;
• 100 g gelatin.

Gelatin is diluted in water and left to swell. After it, it is necessary to strain and remove unnecessary liquid. Sugar is added to the gelatin, and the mixture is sent to the fire, heated until dissolved, but boiling should not be allowed. All this is poured into water, then glycerin is added. The solution is mixed in such a way that foam does not occur.

Quality checking

In order to assess whether the resulting soap solution is suitable for blowing bubbles, you need to perform some simple steps. Dip the straw into the liquid. After removal, a film should form at the end of the tube. Now you have to blow.

If at the same time small bubbles fly out, which easily scatter into thousands of small droplets, then it is worth adding a little soapy solution (soap, dishwashing liquid, powder, depending on the recipe) and some glycerin.

Thus, by experimenting, you can achieve

Blow tools

The solution is understandable. The main thing is to strictly follow the instructions and observe the proportions. Now it is worth paying attention to the fact that to get an unforgettable experience while blowing soap bubbles, one liquid is not enough.

You also need the appropriate props for soap bubbles. However, it is not necessary to purchase it in the store. It is enough to show imagination and follow simple instructions.

Making giant soap bubbles

Here, too, there are several options. Let's consider them.

Tool #1

You will need: two cocktail tubes, a long cord (about 1 meter).

Production method: the lace is threaded into the tubes. Its ends are tied. Between the tubes you need to leave about 40-50 cm. A kind of loop on sticks should come out.

To get a giant soap bubble, you need to lower this loop with tubes into the prepared solution. At this point, the sticks should be as close to each other as possible. After that, the tool is removed. You need to start spreading the tubes in different directions so that a film forms in the loop. After that, you should guide the structure through the air, creating a huge soap bubble that will shimmer with all the colors of the rainbow. The main thing is to be able to let him fly free in time.

Tool #2

You will need: electric cable, cotton cloth.

Manufacturing method: a circle with a diameter of 20-30 cm is made from the cable. Its ends are fixed with an elastic band or fishing line. The fabric is cut into strips. Then you need to wrap the cable with these segments. As a result, the solution is absorbed into them, and it will last for a long time.

Soapy liquid is poured into a basin of the appropriate size, the resulting hoop is placed in it. The fabric is soaked in the solution. Next - a matter of technology: you need to hold this instrument through the air and enjoy what happened. And whatever you want can come out: several large bubbles and one giant one, and even a whole tunnel with which you can wrap yourself and put a child in it.

Tool #3

You will need: a straw for a cocktail, a wire.

Manufacturing method: the wire is attached to the tube, creating a ring. After that, it can be given the desired shape, for example, hearts or stars. In any case, there will be unusual soap bubbles. You can use any recipe for the solution.

Tool #4

This is the most budget and uncomplicated props. Thanks to him, not huge, but rather large soap bubbles are obtained. The cost of such an invention is zero.

It will take two hands.

Blowing method: palms are dipped in soapy water. The thumbs and index fingers form a ring through which the bubbles will fly out.

What other tools can be used to blow bubbles?

The easiest way to blow is to use a regular juice straw. There may be many. You can take 7 or 10 tubes and fasten them with tape. You will get a wonderful device for blowing a large number of bubbles at the same time.

It’s good if there was a plastic carpet beater at home. It can be used in its original form, or you can remove all connections and leave only the outer rim.

A regular funnel is suitable for blowing large bubbles. If in the process it is necessary to draw more air into the lungs, then it is necessary to close the hole with your finger so that what happened does not disappear completely.

You can use a plastic bottle, after cutting off the bottom of it.

Of course, a special machine for soap bubbles is also suitable, which will blow them without human help and ingenious devices. But such mechanical "blowers" are expensive. At the same time, children are always interested not only in catching rainbow balloons, but also in taking an active part in their creation.

What to think of something interesting?

Having figured out how to make homemade soap bubbles, we can consider various entertainment options.

Drawing with rainbow balls

How to make homemade soap bubbles, of course. After their manufacture, you can engage not only in blowing, but also combine this process with the development of imagination and creative abilities in children. You can draw amazing soap bubbles and then add details to them and turn them into real masterpieces.

This will require not an ordinary soap solution, but a colored one, which is also very easy to make. To do this, add a few drops to the ready-made liquid for bubbles. After that, you can proceed directly to drawing. Here the juice tube comes to the rescue again. It is necessary to blow through it so that bubbles form on the surface of the soapy liquid. When the foam goes over the edge, carefully send it to a sheet of paper. It is necessary to do this action with the number of colors that you want to see in the future picture.

You can make a foam cap and attach paper to the bubbles.

In both cases, the drawing process ends with the fact that the sheet must dry out. Then you can draw what happened to a certain image, or you can leave an abstract picture. It is easy to use for greeting cards and holiday gift wrapping.

A bubble machine will do as well. If you add such a colored solution to it, bring a sheet of paper and hold it for a while, you will also get interesting patterns. The only thing worth considering is that such creativity is best done outdoors. Otherwise, furniture or floors may be damaged. In any case, it will be very interesting for children to watch how colorful bubbles leave beautiful prints on paper.

Unusual Options

Not so long ago, non-bursting soap bubbles appeared on sale. They are completely safe for people and animals. They contain either gelatin or medical glue. Such bubbles do not burst in the hands, they can be used to build pyramids.

If at the base of the solution, then the bubbles stick to the hands, but do not stick together, after them a film remains on the surface, like from PVA glue, but it is very easily removed. After the game, there are no traces left anywhere, although the soap bubble show will turn out to be excellent, because hundreds of small transparent balls fly out at once, which turn out to be everywhere.

On a gelatin basis, interesting soap bubbles are also obtained. Photos with them will turn out amazing, because you can "build" various pyramids. In the case of glycerin solutions, such structures will not work. At the same time, so that the soap bubble does not burst, you must wait a few seconds.

But if you suddenly want to please the child with non-bursting bubbles in the very near future, then ordinary woolen mittens or gloves will do. The effect of them will surprise children very much. The bubble does not burst when touched with wool, but begins to bounce from the hand, like a rubber ball from a wall. Not only a child, but also adults will be captivated by the game with bouncing soap bubbles.

Non-bursting soap bubbles in winter

This phenomenon can be observed in winter with severe frost. When soap bubbles are blown at temperatures below zero, tiny crystals form on their surface, which grow rapidly.

But in the cold, you can get different soap bubbles, photos of which will surprise friends and acquaintances. It all depends on the composition of the liquid used. For example, to get matte, you need to take shampoo as a basis. But the bubbles from the "Fairy" will not "survive" in the snow, because they will have a more fragile structure. The blowing process itself is also important. The straw is lowered to the bottom of the glass so that the solution also covers its outer side. After that, the tube is slowly removed, a little foam is captured. When blowing, the straw must be twisted with smooth movements to prevent the accumulation of excess liquid, which can damage the fragile structure.

During the blowing process, foam should accumulate inside the bubble, which will prevent premature bursting. The "foamy" side of the ball is placed on the snow surface. At temperatures below 15 degrees, 10 seconds after the start of blowing, a frozen crystal ball of unprecedented beauty is obtained.

In childhood, many had fun with one fun: they bought a bottle of solution and blew soap bubbles. These funny balloons were flying all over the place. It was an exciting activity, so interesting that we didn’t even notice how the bubble ended ... Let's discuss how to make soap bubbles at home.

It's time to remember the childhood fun and fully enjoy the soap balls. No need to rush to the toy store to buy a soap solution, it's easy to make it yourself at home. Basic components can be found in any home:

• Glycerin or sugar.
• Water.
• Soap.

How to make your own soap solution at home

There are many recipes for making soap bubbles, which differ in composition and method of preparation. Choose the recipe, the ingredients of which you can easily find at home. Or prepare the components for a special soap solution in advance. I propose to see how to cook a classic version.

As you can see, everything is quite simple. If you cannot find a jar of glycerin at home, you will have to walk to the pharmacy.

Cooking method:

1. Take a bar of laundry soap and rub it on a grater. Instead of a grater, you can use a knife, choose what is more convenient.
2. Pour hot water over the soap and stir the solution with a spoon until the soap is completely dissolved. In the process, you can chuckle with villainous laughter.
3. Do not bring the solution to a boil! The water should be hot, but not boiling!
4. If a few bars of soap are left floating in the saucer, strain the solution through cheesecloth.
5. Last step. Pour glycerin into the resulting liquid.

Do not forget to prepare a tool with which you will blow bubbles. A stick from under a store bottle of soap bubbles will do. Often at home they use a straw, which is also very convenient. And you can roll a circle of the desired diameter from the wire found in the garage. Now you are ready to blow bubbles of any size!

Video recipe

Solution for soap bubbles as a store

In addition to the classic method, there are many other recipes for making bubbles. Let's say you want to make a soapy solution, just like in the store. In this case, we will study the table with the composition for the manufacture of the store version.

It is better not to use tap water. It degrades the quality of the bubbles! Take the dishwashing detergent that you usually use.

As soon as you find corn syrup in the store, you can start making soap bubbles. Ready?

Cooking:

1. Boil water and pour into a bowl.
2. Pour dish liquid into a bowl and stir.
3. Add corn syrup and mix well.

Ready. You are awesome. You can leave the solution for two to three hours to infuse, and then start having fun by encouraging friends to get involved.

Video tips

DIY soap bubbles with glycerin

Are you intrigued? Liked the idea and want to continue experimenting with bubbles? Well, the classic recipe is not the only one that uses glycerin.

laundry detergent recipe

I want to warn you, it can take several days to prepare a solution with washing powder. If you are ready to make sacrifices, read the instructions.

Step-by-step instruction:

1. Warm up the water. Do not bring to a boil.
2. Add laundry detergent and stir. The powder should completely dissolve.
3. Pour glycerin and ammonia into the solution. Stir.
4. Let it brew for at least two days. It is possible and more.
5. Strain the solution through cheesecloth and place the container in the refrigerator overnight.

If you do everything right, the results will pleasantly surprise you.

Recipe for big bubbles

The method is a little more complicated than the previous ones, but the result will be more interesting, because the bubbles will come out more than one meter!

Take either distilled or boiled water. If you want to cook more liquid, just keep the proportions.

How to do:

1. Dissolve the gelatin in a bowl of water, then strain the excess water through cheesecloth.
2. Add sugar. It remains to melt everything. Do not heat the liquid to boiling point!
3. Take the resulting liquid and add it to the prepared water.
4. Add glycerin and dish detergent next. Stir the resulting solution. Be careful! The liquid must not foam.

Ready! Now you can please your loved ones with bubbles of a new scale!

Recipe for tenacious big bubbles

The second way is to make a liquid that will make meter-long bubbles.

Filtered or distilled water is fine. Use thicker dishwashing liquid. Use a lubricant without impurities, we just create a solution for bubbles.

Cooking:

1. Mix all ingredients except water.
2. Heat the water and pour into the solution.
3. Mix thoroughly, but not too much. Foam should not appear on the surface of the liquid.

The solution is ready! So-called "especially tenacious" bubbles have turned out. They will not burst even after contact with water. I advise you to try them in action right now!

Homemade recipe without glycerin

If there is no glycerin at hand, it does not matter. The bubbles, of course, will not be as impressive, but they will inflate. And this is the main point.

Detergent option

The recipe is extremely simple and unpretentious.

Dishwasher detergent is not recommended!

Mix the ingredients well in the required quantity and you're done. You can blow bubbles.

Foam option

Another simple recipe for crafting soap solution at no extra cost. You will need:

We take the components, combine, mix - you're done! Blow bubbles and enjoy!

How to make soap bubbles that don't burst

If you're serious about the art of blowing bubbles, it's helpful to learn how to make the strongest bubbles that won't burst. For cooking you will need:

Ready? Great! Let's start making the solution.

Cooking method:

1. Take soap and crumble into a cup.
2. Add hot water. Stir until the soap is completely dissolved.
3. We put sugar and glycerin in the solution. We stir to win.

A particularly strong solution is prepared and can be used. Experience in situations where ordinary bubbles immediately burst.

Summer is in full swing - and you want something like that ... To be fun, simple and - to have a sea of ​​​​real summer sensations! One of the great options is soap bubble festival . Yes, yes, a holiday: any, even the most boring, evening with soap bubbles turns into an adventure. It's fun and beautiful, plus - new sensations, new observations, new discoveries ...

Oh, soap bubbles!

You can spend a quiet evening of experiments, you can have a fun competition, or you can have a noisy pampering for kids ... By the way, how many adults can walk past children blowing soap bubbles and not show "class"?

Today we have prepared for you 7 recipes for making soap bubbles at home . But you can use them in yard conditions, and in summer cottages, and in parks, and in holidays, and in walking, and even in the conditions of playing in a laboratory for studying the properties of soap bubbles!

What is important to know in order to make soap bubbles at home Fine?

Of course, the main thing is the solution and what sticks (tubes, frames) for soap bubbles you use. Below we give 7 recipes for soap bubble solution. You can choose the one that suits you best, but do not be surprised: you may have to "tailor" it to your conditions. Let some helpful tips help you.

The best children's books

Useful tips for those who make soap bubbles at home:

• It is better to use boiled water to prepare the solution, and even better - distilled.
• The less impurities (perfume and other additives) in the soap or other detergent used to prepare the liquid, the more reliable the result.
• How to make the solution denser, and the quality of soap bubbles better? To do this, use glycerin or sugar dissolved in warm water.
• The main thing is not to overdo it with glycerin and sugar, otherwise it will be difficult to blow bubbles.
• A less dense solution forms less stable bubbles, but they are easier to blow out (suitable for babies).
• Many bubble buffs advise letting the solution sit for 12 to 24 hours before drinking.
• At the start, before blowing the bubble, you need to wait for a clean, solid film (on which you will blow), without additional small bubbles around the edges that sometimes occur. Bubbles must be carefully removed or wait until they disappear. And in general, it is advisable to avoid foam: insist, cool the liquid for soap bubbles - if only there was less foam.
• Wind and dust in the air are not helpers for soap bubbles.
• High humidity is a helper.

How to make a solution for soap bubbles: 7 recipes for all occasions

Recipe 1, simple: soap bubbles from dishwashing liquid

You will need:

• 1/2 cup dishwashing liquid
• 2 glasses of water
• 2 teaspoons of sugar

Mix all ingredients thoroughly. Ready!

You can use a similar composition, where glycerin is used instead of sugar:

• 2/3 cup dishwashing liquid
• 4 glasses of water
• 2-3 tablespoons of glycerin.

Thoroughly mix all the ingredients and put the mixture in a cool place for 24 hours. Glycerin can be purchased at any pharmacy.

To do colorful soap bubbles , add food coloring to the mixture (2-3 teaspoons for the entire volume or divide into parts to make bubbles of different colors).

Recipe 2, for the little ones: how to make soap bubbles from baby shampoo?

You will need:

• 200 ml baby shampoo,
• 400 ml of distilled (boiled, melted) water.

This liquid should be infused for a day, after which you should add:

• 3 tablespoons of glycerin or 6 teaspoons of sugar.

Recipe 3, Fragrant: Bath Bubbles

You will need:

• 3 parts bath foam
• 1 part water.

Recipe 4, original: soap bubbles with syrup

You will need:

• 2 cups dishwashing liquid
• 6 glasses of water
• 3/4 cup corn syrup

Recipe 5, cheap and cheerful: solution for soap bubbles from laundry soap

You will need:

• 10 glasses of water
• 1 cup grated laundry soap
• 2 teaspoons of glycerin (or a solution of sugar in warm water, you can - with gelatin).

You can get by with a combination of water and soap without additional additives (for example, if there is simply no glycerin). Soap grated on a grater should be poured into boiled water, and hot, and stirred to full soap dissolution. If the dissolution is difficult, you can slightly warm the mixture with continuous stirring. Do not bring to a boil!

And if you do not want to grate laundry soap, then use this composition:

• 100 ml liquid soap
• 20 ml distilled water,
• 10 drops of glycerin (after the foam settles, i.e. after about 2 hours. It is better to infuse the liquid in a cold place).

Recipe 6: extra strong soap bubbles for experimenters

You will need:

• 1 part concentrated sugar syrup (proportion: to 1 part of water 5 parts of sugar: for example, for 50 g of sugar - 10 ml of water),
• 2 parts grated soap
• 4 parts glycerin
• 8 parts distilled water.

With this solution, you can, for example, build various figures from soap bubbles by blowing them onto a smooth table surface.

Recipe 7: giant soap bubbles for a children's party

You will need:

• 50 ml glycerin,
• 100 ml dishwashing liquid,
• 4 teaspoons of sugar
• 300 ml of water.

A solution for giant soap bubbles can be prepared in a basin, and they are “blown out” using a gymnastic hoop or a frame specially twisted from a flexible material. Honestly, you don’t have to blow - rather, you have to wave the frame or slowly pull a large, strong bubble out of the basin.

Giant soap bubbles on the beach (video):

What to blow? Tubes/frames/sticks for soap bubbles

As sticks for soap bubbles, you can use tubules of different diameters, frames, cocktail sticks (especially with a cross-shaped or fringed tip and bent “petals”), hollow blades of grass or pasta, dough cutters, funnels, you can buy at the store special guns for soap bubbles or just blow them through your fingers! 🙂

And if you are invited to a real soap bubble festival or arrange one for yourself, you can make original stick-frames with your own hands from wire and colored beads, for example, these:

Another original idea - use it to blow large soap bubbles ...!

Soap bubbles show

And finally - see how beautifully and unusually soap bubbles are used in theatrical shows.

How to make soap bubbles, recipe for soap bubbles, composition for soap bubbles

Soap bubbles are a symbol of carefree happiness. How much joy they bring to children, and invariably cheer up adults. This simple fun appeared in antiquity. It is said that during the excavations of ancient Pompeii, images of children were found blowing into tubes from which bubbles fly out. If you want to take a break, give your little fidget a bottle of soapy water and a straw, and you can be sure that he will not disturb you for the next half hour.
In childhood, we made soap bubbles very simply. A little shampoo was poured into the container, diluted with water, shaken and the balls were blown out of the tube. But, unfortunately, they did not rush up, but fell to the ground. In addition, large bubbles did not inflate at all, they burst, not yet breaking away from the tube. Now in the store you can buy many devices for creating bubbles along with a ready-made solution.

But for those who want to show their imagination, we offer several ways to make soap bubbles yourself.
For the simplest and most proven recipe, you will need 200 ml of dishwashing liquid, 600 ml of water, and, very importantly, 100 ml of glycerin, which will add strength to the bubble. You just have to stir the solution, and multi-colored "durable" bubbles are ready.
If you are wondering how to make large soap bubbles, then this recipe is suitable. It is necessary to rub a piece of laundry soap into hot water (400 ml). Heat over low heat until completely dissolved. The result should be left for a few days, and then add a couple of tablespoons of sugar to it. Such bubbles can be inflated to huge sizes, they will not burst.

And you can make the bubbles even more colorful. To do this, you need to take half a glass of dish soap (baby shampoo may work), one and a half glasses of water, 2 teaspoons of sugar and a little food coloring.
Why add sugar to the mixture? Oh, in soapy water, he can work wonders! Thanks to him, the bubbles are inflated not one at a time, but immediately in large numbers, literally shooting from the tube, like from a machine gun.
When you have mastered the ways of how to make soap bubbles yourself, it will be easy to come up with many exciting games. For example, you can make several bubbles inflate in each other. To do this, you will need a glass funnel from which a large soap bubble is blown. Then they take a tube, lower it almost entirely into a soapy solution and push it with great care through the wall of the first bubble, bringing it to the middle. Then, gently pulling it back, inflate the second soap bubble inside the first one.
This experiment is quite complicated, it is suitable for children over 7 years old, who are no longer so interested in just blowing into a tube and enjoying flying rainbow balloons.
So, if you figured out how to make soap bubble liquid, then everything depends on your imagination. You can just blow bubbles while watching them fly. You can arrange competitions - who will blow the most. And you can conduct complex experiments that require accuracy and concentration.
It is also worth telling how to make soap bubbles around a flower or any other beautiful object. Of course, the resulting composition will be short-lived, it cannot be given as a gift, but you will be provided with a charge of excellent mood.
Pour the solution prepared according to one of the above recipes into the plate by 2-3 mm.
Put a flower in the middle and cover it with a glass funnel. Then, very gently, begin to lift it up by blowing into its narrow opening. You should have a bubble. When it is large enough, gently tilt the funnel to release it. Now your flower is under a transparent rainbow dome.
Learning how to make soap bubbles is quite simple. It will take a little patience, and the main thing in this matter is fantasy, which will allow you to come up with new games with soap balls.

Recipe for Giant Soap Bubble Solution(the recipe is designed for 3.5 liters of solution):

• 2 cups faerie or other dishwashing liquid
• 1 cup corn syrup
• 1 sachet regular gelatin

We mix all the components, add water to a volume of 3.5 liters, do it slowly so that a lot of foam does not form. We leave the mass for 24 hours.
To make huge soap bubbles around a child, you need about 10 liters of soap solution. Pour liquid into a large basin or a children's inflatable pool, put a hula hoop in the center and carefully place the child (very slippery!), Slowly raise the hula hoop and the child is in the bubble!!! The kids are usually delighted!

And here is another easy way to make soap bubbles:

• 200g dishwashing detergent
• 600ml water
• 100 ml of glycerin (sold at any pharmacy). Glycerin gives bubble strength
• You can add some sugar

Interesting ideas with soap bubbles:

• Bubble in a bubble. To do this, you will need a funnel and a drinking straw. We blow the first bubble through the funnel, while it has not come off yet, we push the tube to the center of the first bubble and blow it out.
• Soap bubbles in the cold. It's great to inflate bubbles in the cold, at a temperature of -5-7 degrees the bubble can freeze if you put a snowflake on top of it or gently lower it on the snow. This is really a very beautiful sight, the bubble is covered with patterns and shimmers with all the colors of the rainbow.
• Bubbles by candlelight. You know, there are such special floating candles, so if you put them in a bath of water, turn on and turn off the light and blow bubbles at the same time, there will be a wonderful flickering spectacle.

Inflating devices:

• Wire loop. Can be made in different diameters.
• Straw for drinks. Try cutting it into 4 pieces at the end and unroll them like a flower.
• Loop for giant bubbles. Through two strong straws, you pass an elastic band (Hungarian), the length is 5 times longer than the tubes and tie the ends together. Lower the tubes folded together into the solution and slowly dilute, you should get a huge bubble, you can blow it yourself, or you can put it in the wind.
• Two sticks with a rope tied between them to form a triangle.
• In general, there are a lot of ways ... experiment ...

Recipe for how to make soap bubbles for the show

• 15 parts distilled water
• 0.5 parts glycerin
• 2 tablespoons lemon juice
• 1 tablespoon bicarbonate of soda
• 1 teaspoon J-Lube

Second recipe

A slightly different proportional composition for soap bubbles:

• 12 parts distilled water
• 1 part Fairy ultra liquid detergent
• 0.5 parts glycerin
• 0.25 hours Polyvinyl alcohol
• 2 teaspoons of Metylan glue (see photo below)
• 1 teaspoon J-Lube

The easiest way to prepare a solution is as follows: 200 gr. dishwashing detergent (but not for dishwashers) you need to take 600 ml. water and 100 ml. glycerin (sold in any pharmacy). Mix everything well and your solution is ready. Glycerin is exactly the tool that makes the walls of the soap bubble stronger, and the bubble itself, respectively, more long-lived.

Method number two. This soap bubble recipe is more complicated and the preparation of the solution will take more time. For 600 ml. HOT water must be taken 300 ml. glycerin, 20 drops of ammonia and 50 gr. any powdered detergent. We mix all the ingredients and leave to brew for 2-3 days. After that, the solution is carefully filtered and put in the refrigerator for 12 hours. And finally, you can start blowing rainbow beauties.

The third way, in my opinion, is very doubtful. But you can try. Rub a piece of laundry soap on a coarse grater. Dissolve the resulting soap shavings (4 tablespoons) over low heat in 400 ml. hot water. Leave the solution for a week, after which add 2 teaspoons of sugar to it. Leave until sugar dissolves, mix - ready.

And you do not want to create a festive mood for your children on the most ordinary day? It turns out that it is very easy. No need to invent new games or go to an entertainment center. Soap bubbles are sure to cheer everyone up. Do you know, how to make homemade soap bubbles? It often happens that soap bubble liquid purchased in a store casts doubt on its quality. Therefore, you can think about how to make homemade soap bubbles that will be not only strong, but also huge.
There are several recipes for soap bubble solution.. Depending on which one you choose, the size of the bubbles will vary. There is also a solution that is best used in winter.
To prepare the most common solution for soap bubbles, take 1/4 cup of water, 1/3 cup of baby shampoo, 2 teaspoons of sugar. If desired, you can add a drop of food coloring, then your bubbles will shimmer beautifully. Instead of sugar, you can take glycerin, which is sold in a pharmacy. Adding sugar or glycerin will make the bubbles firmer.
Blowing soap bubbles is also very fun in the cold, at temperatures below -7 ° C. Since it is very cold outside, soap bubbles will freeze and become patterned like frosted glass. In this case, to make homemade soap bubbles, you will need laundry soap. Plan it in warm water in a ratio of 1:10. To make the soap melt faster, you can boil the liquid. Stir the soapy solution carefully so as not to burn yourself.
You can check the prepared solution like this: try blowing a bubble with a diameter of 10 cm. If you succeeded, the solution is ready. If not, you can add more soap. In addition, soap bubbles can be tested for strength. Dip your finger in the soap solution and gently touch the bubble. If it does not burst, the solution is ready. To make the bubbles stronger, you can add a little more soap. As a result, you will get a liquid that will be ideal for playing with soap bubbles in the cold.
Another good bubble solution recipe: Take 2 parts soap, 4 parts glycerin, 8 parts water and 1 part sugar syrup. Be sure to use hot water to prepare the solution.
Would you like to try blowing huge soap bubbles?? To do this, you will need not only a solution, but also a special device. The solution for such soap bubbles is made as follows: take 200 ml of dishwashing detergent, 600 ml of warm water and 100 ml of glycerin. To make the bubbles stronger and not burst so quickly, you need to take soft water. Ordinary tap water is not suitable, because it contains a lot of salts, which makes soap bubbles fragile. To soften water, it is enough to boil it and let it stand.
Now make a special device for inflating huge bubbles. Make a loop out of nylon rope and tie it to two sticks. Tie the loop so that it forms a triangle shape, for which you can use a small weight.
Now you can start blowing bubbles. They are best done outdoors in calm weather. Pour the solution into the basin and lower the rope loop from your device there. Pick it up and start stepping back. Under the action of the air flow, the bubbles will inflate themselves and can reach up to 1 m in diameter.
You can also make dolls out of soap bubbles. To do this, take any solution for bubbles and pour it into a flat plate with a diameter of 20 cm. Using a straw for cocktails, inflate the bubble so that it lies on the plate. You will get a hemispherical bubble. Carefully insert the straw inside the bubble and inflate another one, but now smaller. This way you will get several bubbles located one in one.
As you can see, playing with soap bubbles is a fun hobby.. Both adults and children really like to inflate them and watch them shimmer with iridescent stains. Try and play with your children in this fun and interesting game! After all, now you know how to make homemade soap bubbles.

— composition and recipe of soap bubbles - how to make at home attached!
First recipe- the most common soap bubbles.
Compound:
1/3 cup tear-free baby shampoo 1/4 cup water 2 teaspoons sugar 1 drop food coloring

viscous soap bubbles
Compound:
1/4 cup dishwashing liquid, 1/4 cup glycerin (drug store), 3/4 cup water, 1 tablespoon sugar.

One more tip:
Bubbles can be blown with any foaming liquid ... but ordinary laundry soap is best. It needs to be finely cut, dissolved in hot water (you can even warm it up very much for this)
Approximate proportions are as follows - 10 parts of water to 1 part of soap.
The life of a bubble depends on how long it stays wet. Glycerin is great at slowing down the drying time. so does a solution of sugar with gelatin. The glycerin solution is better, but sugar and gelatin are not so expensive and we always have them at home. Proportions such -glycerol are added from 1/5 to 1/3 parts in relation to the volume of the soap mixture. Or 1/4 part of a solution of sugar with gelatin. The best mixture for very large blisters is 2 parts soap, 4 parts glycerin, and 1 part syrup diluted in 8 parts water.
Cocktail straws are suitable for blowing soap bubbles. Make 4 short cuts at one end and separate them in different directions, like the petals of a flower.

It is very interesting to blow soap bubbles in the winter on the street. At a temperature of -7 degrees, the bubble can freeze. To do this, you need to put a snowflake on top of it or gently lower the bubble onto the snow. Such a trick requires a lot of effort and effort, but it's worth it, believe me!
How else can you diversify the process of inflating soap bubbles? Take a flat plate with a diameter of 15-20 cm. Pour some bubble solution on it, take a cocktail tube and blow a large soap bubble so that it lies on a plate in the form of a hemisphere. Then gently twist the tube so that its end detaches from the wall of the bladder, but remains inside. Blow a second bubble. How many times you repeat this procedure, so many bubbles you will have according to the "matryoshka" principle.

10 compositions for large soap bubbles

In recipe formulations, the word "part" is used. "Part" is any volume, for example:
Composition No. 4:
16 parts water
3 parts detergent
1 part glycerin

So, it can be 16 tablespoons of water, 3 tablespoons of detergent, 1 spoon of glycerin or
160 ml water, 30 ml detergent, 10 ml glycerin...

Fairy is used as a detergent, it must be said that it is Fairy that gives the best result.

So the ingredients are:

Composition 1.

50 grams of sugar
10 grams of boiling water
Got syrup.

Mix with detergent in the ratio of 20 syrup and 1 detergent.

Composition 2.

0.5 cup baby shampoo (I used Dragonfly shampoo)
1.5 cups distilled water
2 teaspoons sugar (no slide)

Mix and add the same amount of glycerin to the resulting mixture.

The word "the same" implies that you mixed all the components except glycerin, and you got a certain volume of solution, and that's exactly the same amount, then glycerin is added, the same amount as the volume obtained from the remaining components.

Composition 3.

200 ml baby shampoo (shampoo "Dragon" was used)
400 ml distilled water
3 tablespoons of glycerin

Mix.

Composition 4.

16 parts water
3 parts detergent
1 part glycerin

Composition 5.

100 ml water
2 ml baby shampoo
10 ml. glycerin

Mix and add ammonia until transparent.

Composition 6.

4 parts distilled water
1 part detergent
1 part glycerin
0.1 part ammonia

Mix.

Composition 7.

2 parts detergent
6 parts distilled water
1 part glycerin

Composition 8.

600 ml. hot water
300 ml glycerine
20 drops of ammonia
50 grams of powder detergent

Mix, insist 2-3 days, filter and refrigerate for another day.
(the condition by which it is required that the agent be infused was not met in the experiment)

Composition 9.

1 liter of distilled water
150 ml glycerin
300-400 ml baby shampoo

Composition 10.

1 part dish liquid
5 parts polyvinyl alcohol
7 parts water
0.4 parts glycerin

Some compositions at first glance are the same, but in such a delicate matter as a soap bubble, proportions can play a decisive role.