How to make a good solution for soap bubbles. Bubble Recipes

One of the most favorite pastimes for any age is soap bubbles. Their recipe has long been known and widely used by parents in order to turn the child's everyday life into a holiday. Today on the shelves of children's stores you can find a huge number of all kinds of jars for inflating rainbow bubbles, but their composition is very doubtful and unsafe for humans. Therefore, parents have to innovate and look for instructions on how to make homemade ones so as not to harm the health of their child.

There are quite a few options using a variety of ingredients to prepare the desired solution. In this case, all instructions and proportions should always be strictly observed in order to make beautiful and durable soap bubbles. The recipe must be from reliable sources. Otherwise, there is a risk that nothing will work out, and the children will be upset.

Key ingredients for soap solution

So, you will need the following components.

1. Dishwashing liquid. There is no exact brand that could be singled out as the ideal option for creating a solution for soap bubbles. It is worth trying something that you use on a daily basis.
2. Soap. Economical is best.
3. Water. This component should be carefully considered. Tap water is not always good for soap bubbles. It contains too many different salts. You should first boil it and let it stand for several hours.
4. Glycerin solution. This is the component that is responsible for the strength, color and size of the bubble. Glycerin is sold in pharmacies of the city. One bottle is enough for several times. As a rule, a teaspoon of glycerin is added to one liter of soap bubble solution. But there are exceptions.

Popular Recipes

Consider the most common options.

Recipe #1

The most popular and does not require special ingredients. All you need is a piece and water. These components can be found in any home. Soap should be ground on a coarse grater or cut into small pieces and dissolved in warm water. To speed up the process, the resulting mixture can be put on low heat and stirred until a homogeneous mass is obtained.

Recipe number 2

This is one of the easiest ways to make soap bubbles at home with kids. This will require: 100 g of dishwashing liquid, 300 ml of water and 50 ml of glycerin. You need to mix all the ingredients. Done, you can start entertaining the kids.

Do not use tap water, because it contains too much salt, this negatively affects the film.

Glycerin is needed in order for the bubbles to be strong.

Recipe number 3

For this option for making a solution, you will need several days.

Required: 300 ml of hot boiled water, 150 ml of glycerin, 10 drops of ammonia, 25 g of washing powder. All this must be thoroughly mixed and left alone for 2-3 days. After the time has elapsed, the solution must be filtered and sent to the refrigerator for 10 hours. The bubbles are very large and strong. No worse than those that are allowed by professionals on holidays.

If you take the matter seriously, then with the help of the created liquid you can arrange a real show of soap bubbles. Such a performance will decorate any holiday, even if it is an adult party, it will definitely not be boring.

Recipe number 4

This is a variant of creating a liquid for inflating large bubbles.

This will require:

• 1.6 liters of water;
• 0.5 l dishwashing liquid;
• 0.2 l of glycerin solution;
• 100 g of sugar;
• 100 g gelatin.

Gelatin is diluted in water and left to swell. After it, it is necessary to strain and remove unnecessary liquid. Sugar is added to the gelatin, and the mixture is sent to the fire, heated until dissolved, but boiling should not be allowed. All this is poured into water, then glycerin is added. The solution is mixed in such a way that foam does not occur.

Quality checking

In order to assess whether the resulting soap solution is suitable for blowing bubbles, you need to perform some simple steps. Dip the straw into the liquid. After removal, a film should form at the end of the tube. Now you have to blow.

If at the same time small bubbles fly out, which easily scatter into thousands of small droplets, then it is worth adding a little soapy solution (soap, dishwashing liquid, powder, depending on the recipe) and some glycerin.

Thus, by experimenting, you can achieve

Blow tools

The solution is understandable. The main thing is to strictly follow the instructions and observe the proportions. Now it is worth paying attention to the fact that to get an unforgettable experience while blowing soap bubbles, one liquid is not enough.

You also need the appropriate props for soap bubbles. However, it is not necessary to purchase it in the store. It is enough to show imagination and follow simple instructions.

Making giant soap bubbles

Here, too, there are several options. Let's consider them.

Tool #1

You will need: two cocktail tubes, a long cord (about 1 meter).

Production method: the lace is threaded into the tubes. Its ends are tied. Between the tubes you need to leave about 40-50 cm. A kind of loop on sticks should come out.

To get a giant soap bubble, you need to lower this loop with tubes into the prepared solution. At this point, the sticks should be as close to each other as possible. After that, the tool is removed. You need to start spreading the tubes in different directions so that a film forms in the loop. After that, you should guide the structure through the air, creating a huge soap bubble that will shimmer with all the colors of the rainbow. The main thing is to be able to let him fly free in time.

Tool #2

You will need: electric cable, cotton cloth.

Manufacturing method: a circle with a diameter of 20-30 cm is made from the cable. Its ends are fixed with an elastic band or fishing line. The fabric is cut into strips. Then you need to wrap the cable with these segments. As a result, the solution is absorbed into them, and it will last for a long time.

Soapy liquid is poured into a basin of the appropriate size, the resulting hoop is placed in it. The fabric is soaked in the solution. Next - a matter of technology: you need to hold this instrument through the air and enjoy what happened. And whatever you want can come out: several large bubbles and one giant one, and even a whole tunnel with which you can wrap yourself and put a child in it.

Tool #3

You will need: a straw for a cocktail, a wire.

Manufacturing method: the wire is attached to the tube, creating a ring. After that, it can be given the desired shape, for example, hearts or stars. In any case, there will be unusual soap bubbles. You can use any recipe for the solution.

Tool #4

This is the most budget and uncomplicated props. Thanks to him, not huge, but rather large soap bubbles are obtained. The cost of such an invention is zero.

It will take two hands.

Blowing method: palms are dipped in soapy water. The thumbs and index fingers form a ring through which the bubbles will fly out.

What other tools can be used to blow bubbles?

The easiest way to blow is to use a regular juice straw. There may be many. You can take 7 or 10 tubes and fasten them with tape. You will get a wonderful device for blowing a large number of bubbles at the same time.

It’s good if there was a plastic carpet beater at home. It can be used in its original form, or you can remove all connections and leave only the outer rim.

A regular funnel is suitable for blowing large bubbles. If in the process it is necessary to draw more air into the lungs, then it is necessary to close the hole with your finger so that what happened does not disappear completely.

You can use a plastic bottle, after cutting off the bottom of it.

Of course, a special machine for soap bubbles is also suitable, which will blow them without human help and ingenious devices. But such mechanical "blowers" are expensive. At the same time, children are always interested not only in catching rainbow balloons, but also in taking an active part in their creation.

What to think of something interesting?

Having figured out how to make homemade soap bubbles, we can consider various entertainment options.

Drawing with rainbow balls

How to make homemade soap bubbles, of course. After their manufacture, you can engage not only in blowing, but also combine this process with the development of imagination and creative abilities in children. You can draw amazing soap bubbles and then add details to them and turn them into real masterpieces.

This will require not an ordinary soap solution, but a colored one, which is also very easy to make. To do this, add a few drops to the ready-made liquid for bubbles. After that, you can proceed directly to drawing. Here the juice tube comes to the rescue again. It is necessary to blow through it so that bubbles form on the surface of the soapy liquid. When the foam goes over the edge, carefully send it to a sheet of paper. It is necessary to do this action with the number of colors that you want to see in the future picture.

You can make a foam cap and attach paper to the bubbles.

In both cases, the drawing process ends with the fact that the sheet must dry out. Then you can draw what happened to a certain image, or you can leave an abstract picture. It is easy to use for greeting cards and holiday gift wrapping.

A bubble machine will do as well. If you add such a colored solution to it, bring a sheet of paper and hold it for a while, you will also get interesting patterns. The only thing worth considering is that such creativity is best done outdoors. Otherwise, furniture or floors may be damaged. In any case, it will be very interesting for children to watch how colorful bubbles leave beautiful prints on paper.

Unusual Options

Not so long ago, non-bursting soap bubbles appeared on sale. They are completely safe for people and animals. They contain either gelatin or medical glue. Such bubbles do not burst in the hands, they can be used to build pyramids.

If at the base of the solution, then the bubbles stick to the hands, but do not stick together, after them a film remains on the surface, like from PVA glue, but it is very easily removed. After the game, there are no traces left anywhere, although the soap bubble show will turn out to be excellent, because hundreds of small transparent balls fly out at once, which turn out to be everywhere.

On a gelatin basis, interesting soap bubbles are also obtained. Photos with them will turn out amazing, because you can "build" various pyramids. In the case of glycerin solutions, such structures will not work. At the same time, so that the soap bubble does not burst, you must wait a few seconds.

But if you suddenly want to please the child with non-bursting bubbles in the very near future, then ordinary woolen mittens or gloves will do. The effect of them will surprise children very much. The bubble does not burst when touched with wool, but begins to bounce from the hand, like a rubber ball from a wall. Not only a child, but also adults will be captivated by the game with bouncing soap bubbles.

Non-bursting soap bubbles in winter

This phenomenon can be observed in winter with severe frost. When soap bubbles are blown at temperatures below zero, tiny crystals form on their surface, which grow rapidly.

But in the cold, you can get different soap bubbles, photos of which will surprise friends and acquaintances. It all depends on the composition of the liquid used. For example, to get matte, you need to take shampoo as a basis. But the bubbles from the "Fairy" will not "survive" in the snow, because they will have a more fragile structure. The blowing process itself is also important. The straw is lowered to the bottom of the glass so that the solution also covers its outer side. After that, the tube is slowly removed, a little foam is captured. When blowing, the straw must be twisted with smooth movements to prevent the accumulation of excess liquid, which can damage the fragile structure.

During the blowing process, foam should accumulate inside the bubble, which will prevent premature bursting. The "foamy" side of the ball is placed on the snow surface. At temperatures below 15 degrees, 10 seconds after the start of blowing, a frozen crystal ball of unprecedented beauty is obtained.

If you truly love entertainment, then this will become interesting for you, because games with a soap bubble cause wild delight and interest not only in children, but also in adults. When blowing soap bubbles, I always dreamed that the soap bubble would not burst, but it turned out that the life of a soap bubble ended in the prime of life, when it could still fly and fly.

What you need to arrange a game with a soap bubble:

1.Water

1.Empty container

3.Tubule

4.Soap solution

5. Woolen glove

Sequencing:

1. Making a soapy solution

2. Putting on a glove

3. Blowing a bubble

4. We rejoice at the result.

Despite its simplicity, the process of making soap bubbles has a few secrets that you need to know. For example, it is worth knowing that for soap bubbles NOT It is advisable to use hard water. Chilled boiled water is ideal, to which you need to add shampoo or liquid soap. In this case, the concentration should be 1:10. This figure is not strict, but overdoing it is also not desirable.

If you are going to make soap bubbles for a small child, you should consider using a baby shampoo that does not cause irritation if it accidentally gets into the eyes. One of the secrets of big and strong bubbles is the addition of gelatin or glycerin.

Recipe for making homemade soap bubbles

There are several ways.

The easiest way to make bubbles at home

• We take 100 ml. dishwashing detergents
• Add 50 ml. glycerin and 300 ml. water
• Mix thoroughly and you're done!

Recipe for making non-bursting bubbles

Recipe one

I’ll clarify right away that in order to get the finished mixture, you must wait at least three days, so you should prepare in advance for a walk that involves such entertainment. So let's prepare the water first. Ordinary tap water will not work. The fact is that it contains impurities of salts, and salts, in turn, make the bubbles inelastic. No matter how hard you try, blowing a big bubble out of a solution made from ordinary water will not work. That is why it is better to use distilled water. We measure out 600 milliliters and bring the water to a boil.

Then add 300 milliliters of ordinary glycerin to boiling water, which can be purchased at the nearest pharmacy, 20 drops of ammonia (sold there), and then add 50 grams of powdered detergent (cleaning or washing powder).

Thoroughly mix the solution so that all the ingredients are completely dissolved in it.

There will still be sediment at the bottom, but this is normal. The resulting solution is covered with a lid and left for two to three days at room temperature. Do not forget that children are curious creatures, so keep the container with the solution out of the reach of small hands. After this period, the solution should be thoroughly filtered by passing it through a piece of gauze folded in three to four layers. And again we wait, but the filtered solution is already stored in the refrigerator. After 12 hours, you can pour it into a bottle and go for a walk. Of course, this recipe cannot be called simple in terms of preparation, but the result is worth it. The bubbles from it are large, do not burst for a long time and shimmer in different colors.

Recipe two

To prepare a solution according to this recipe, we need 800 milliliters of water (remember that it must be distilled), 200 milliliters of any dishwashing detergent, 100 milliliters of glycerin and 50 grams of gelatin and sugar. First, pour boiling water over gelatin so that it swells. Drain excess water, add sugar to gelatin and dissolve the mixture over low heat, preventing boiling. After that, pour in all the water, detergent and glycerin, mix. Please note that you should mix very carefully so that foam does not appear on the surface of the solution. From such a solution it turns out to blow strong and large bubbles. And the ingredients in it are practically safe, if you do not take into account the dishwashing detergent, which I have a prejudice against.

Recipe three

And these bubbles are good because they can be touched. With light contact with hands and even with water, they remain unharmed. To prepare such a solution, you need to combine 100 milliliters of a transparent lubricant (this is the reason to overcome shame when visiting a sex shop))), 200 milliliters of dishwashing detergent (preferably with a thicker consistency) and 100 milliliters of glycerin. Adding 800 milliliters of boiling water to the mixture, mix, but without foaming. The solution can immediately be poured into a vial.

There are several ways that even in the process of preparing the solution will help you determine if you are doing it right. The first is to blow out a small (about 30 millimeters in diameter) bubble and note the time during which it does not burst. If it lasted half a minute, then the solution is good. You can check in another way. Touch the blown bubble with a finger moistened with the same solution. If the bubble does not burst, then you prepared the solution correctly.

"Tool" for creating huge bubbles

The classic straw in this case, of course, will not work. You can tie a woolen thread to two wooden skewers of the same length, and then moisten it abundantly in soapy water. Vigorously moving and pushing the skewers apart, the inventors of this design get large soap bubbles. Neither me nor my husband came out of this venture, except for a bunch of splashes. Another idea, borrowed from the Internet, justified itself. You will need a cord about 150 centimeters long, a large bead and two sticks. First, we tie a cord to the end of one stick, thread a bead at a distance of 75 centimeters from the knot, and then tie the same end of the cord to another stick. Tie the remaining end of the cord to the first knot. You will get a design of two sticks, between which a cord is stretched in the form of a triangle with a weight bead.

We lower the cord into the soapy solution, let it soak thoroughly, and then straighten the sticks with outstretched arms. Please note that sudden movements are excluded, but making bubbles too slowly will not work either, since the solution from the cord will simply drain to the ground.

A walk with such a “toy” will definitely be appreciated by your children. And not only yours, because huge bubbles cannot help attracting attention. And further. For a walk, I recommend dressing children in clothes that you don’t mind ruining, because I have not yet been able to remove stains from bursting bubbles so that there is no trace left.

Video how to make soap bubbles

Interesting facts about soap bubbles

References to the first soap bubbles were seen on the frescoes found during the excavations of the city of Pompeii. These frescoes depicted children with soap bubbles;

If you inflate a soap bubble in severe frost (-25 C), it will quickly freeze in the air, acquiring an almost perfect spherical shape, and break when it hits the ground;

There are many artists who delight the public with their main work - the creation of soap bubbles of various sizes and shapes.

Soap bubbles will turn out strong precisely thanks to glycerin, which makes the shell of the soap bubble stronger.

You can give a holiday and fun to children without significant costs. We make soap bubbles with our own hands!

Giving children a holiday is easy!

One of the most fun, romantic, simple and exciting things to do is soap bubbles. Moreover, this fun will captivate children and adults, in winter and summer, at home, in the yard and outside the city, and one child, and a large company of different ages. What is especially nice is that you can buy a bottle with a solution for soap bubbles inexpensively, and making your own homemade soap bubbles is even easier. And quickly and in any volume.

Making soap bubbles at home is easy! The main components of the solution are water, soap, glycerin or sugar. But it is important to follow some recommendations that will allow you to prepare such a solution for soap bubbles that the balls will be blown easily, large and will not burst in the next few seconds.

- to prepare the solution, it is better to use not tap water, but boiled, and even better - distilled. There are a lot of salts in tap water, and the less impurities in the components of the solution, the better the quality of the soap film;

- for a greater density of the solution, and therefore, greater strength of future balls, use glycerin or sugar. Liquid glycerin in a pharmacy can be bought for 13 rubles;

- when making homemade soap bubbles, do not overdo it with glycerin / sugar, otherwise the solution will turn out to be dense and the bubbles will be difficult to blow;

- less stable bubbles are blown out of a less dense solution, but they are blown out easily, which is optimal for babies;

- if possible, soak the finished solution for 12-24 hours, and only then start! Some experts advise keeping the solution in the refrigerator for better bubble quality. During this time, the foam will settle - it is not needed in the solution;

- wind and dust are the enemies of soap bubbles;

- high humidity - an assistant.

Soap bubbles are easy to make with your own hands

From laundry soap

You will need:

10 glasses of water

1 cup grated laundry soap

2 teaspoons of glycerin (or a solution of sugar in warm water, gelatin can be added).

Grate the soap, pour it into hot boiled water and stir until completely dissolved. If dissolution is difficult, heat the mixture while stirring continuously. Do not bring to a boil!

Instead of household soap, you can use olive or almond oil soap, but not any perfumed toilet soap - there are additives that are unnecessary in this case.

From liquid soap

You will need:

100 ml liquid soap

20 ml distilled water,

10 drops of glycerin.

Mix soap and water, wait for the foam to settle (this will take approximately 2 hours), then add the glycerin. Let the solution brew, preferably in a cold place.

From dishwashing liquid

You will need:

1/2 cup dishwashing liquid (not for dishwashers!),

2 glasses of water

2 teaspoons of sugar.

Mix all ingredients thoroughly. Ready! Instead of sugar, you can use 1-2 tablespoons of glycerin. And if you put the solution in the refrigerator for a day, the bubbles will turn out notable!

From baby shampoo

You will need:

200 ml baby shampoo,

400 ml of distilled (boiled) water.

3 tablespoons of glycerin or 6 teaspoons of sugar.

The mixture is infused for a day, after which glycerin (or sugar) should be added.

From sugar syrup - for experiments

You will need:

1 part concentrated sugar syrup (proportion: 1 part water 5 parts sugar: for example, 50 g sugar - 10 ml water),

2 parts grated soap

4 parts glycerin

8 parts distilled water.

With this solution, you can, for example, build various figures from soap bubbles by blowing them onto a smooth table surface.

For children's party

You will need:

50 ml glycerin,

100 ml dishwashing liquid,

4 teaspoons of sugar

300 ml of water.

From these ingredients you can "blow" giant soap bubbles. The solution can be prepared in a basin, and “blow out” them with a gymnastic hoop or a frame specially twisted from wire. You don’t even have to blow, you just have to swing the frame or slowly pull a large, strong bubble out of the basin with the same frame or hoop.

From washing powder

You will need:

3 cups hot water

2 tablespoons of powder

20 drops of ammonia

The solution should be infused for 3-4 days, then it must be filtered. This, of course, will take time, but knowledgeable people assure that the bubbles from such a solution are large and beautiful, as in the show.

Large (from 1 meter in diameter) bubbles

Recipe #1

0.8 l of distilled water,

0.2 l dishwashing detergent,

0.1 l of glycerin,

50 g sugar

50 g gelatin.

Soak gelatin in water, leave to swell. Then strain and drain off excess water. Melt the gelatin with sugar without boiling. Pour the resulting liquid into 8 parts of distilled water, add the remaining ingredients and mix without foaming. This solution produces particularly large and firm blisters and is non-toxic.

Recipe number 2

0.8 l of distilled water,

0.2 l of thick dishwashing detergent,

0.1 l of lubricant gel without impurities,

0.1 l of glycerin.

Mix gel, glycerin and dishwashing liquid. Add hot distilled water and mix thoroughly without creating foam. From such a solution, especially “tenacious” bubbles are obtained that do not burst even when in contact with water.

Soap bubbles delight children of all ages. With their help, you can turn any, even the most boring, day into a holiday. Water balls are very small and huge. The strength, touch resistance, volatility and the amount of transparent toys obtained depend on the material to be blown. You don't need to buy a soap show solution from the store, it's easy to make your own at home with simple ingredients.

From this article you will learn

When preparing a surprise, parents need to follow some recommendations, in which case the holiday will be successful:

• Say no! tap water. It contains impurities that reduce the quality of the final result. Boiled water is the best option, distilled water is ideal.
• The strength of the balls is given by sugar, pharmacy glycerin.
• Correctly calculate the ratio of components for the solution. With an excess of glycerin, the bubbles will turn out to be too dense, hard to blow out.
• If you do not find glycerin at home, use sodium tetraborate. It contains glycerin as an auxiliary substance.
• If you are making a mixture with cosmetics, choose a product with a minimum amount of dyes and fragrances. Excess impurities reduce the density of the balls, complicate the blowing process.
• If you are planning to play magic with a younger child, then cut the amount of foaming ingredients in half. The kid himself will be able to blow the balloons. They will be light, in large numbers, but will quickly burst.
• After preparing the solution, leave it in the cold for the whole night or day. During this time, excess foam will settle, the ingredients will mix well, the solution will turn out to be of high quality.
• Use a homemade solution indoors. Wind, street dust interfere with the creation of a great show from a large number of bubbles.
• Increase the humidity in the room before playing. Moisture helps bubbles live longer.
• When you mix the components, check the quality of the solution. Blow up the balloon. If it quickly burst or did not puff up at all, add glycerin. If it is difficult to blow, the bubble is heavy, you need to add a little water, mix well.
• Giant balls are blown slowly from a wide hole. Small ones are made from straws.

Important! Be aware that soapy water will sting your eyes. If an unpleasant situation occurs, do not scare the baby. Rinse eyelids with water and reassure the child. But it is best to tell that this happens in advance.

Check out 15 more life hacks for blowing soap bubbles:

Laundry soap solution (classic)

This is the easiest homemade soap bubble recipe. You will need:

• grated or cut into small pieces soap - 10-20 g
• glycerin alcohol - 2 tsp.
• half a glass of hot water.

Proceed as follows:

1. Grate a bar of soap, put in a wide container.
2. Pour in boiling water, mix well.
3. Wait for complete dissolution.
4. Strain.
5. Pour in glycerin or sodium tetraborate. First 2 tsp.
6. Check the strength of the balls. If the bubble bursts quickly, then add another 1-2 tsp. glycerin.
7. If there is no glycerin, use sugar, gelatin. Add them in equal proportions: 10 g each, then more, if necessary.

Important! Carefully approach the choice of soap. Do not use scented detergent. Take household, glycerin. They don't have any extra additives.

Recipe for a solution without glycerin

Glycerin alcohol is in store bubbles. For a homemade homemade option, this is optional. It is replaced by other components:

• liquid dish detergent - 70 ml
• sugar - 50 g
• water - 70 ml
• shower gel (unscented) - 70 ml.

Making the solution takes a couple of minutes. Dissolve the sugar first, then add AOS, Fairy, Biolan. Let it brew for a couple of hours. If a lot of foam remains on the surface, remove it.

This is interesting! To add a rainbow to the game, use natural dyes. Pour Easter egg color into a soap masher. For the most chic effect, pour the mixture into small bottles and color in different shades.

Dishwashing liquid solution

This is ideal for blowing giant bubbles. Prepare the solution like this:

1. Boil water, 400 ml. Cool it down to 30-35°C.
2. Pour in Fairy, at least 100 ml. Practice shows that it foams and bubbles best.
3. Pour granulated sugar into the solution - 2 tsp.
4. Stir the mixture.

Important! Only ordinary dishwashing detergent is considered safe for babies. Do not use dishwasher liquid. It does not foam and contains active chemical components.

shampoo solution

There is a secret in the step by step instructions. If you use baby shampoo without tears, then the eyes will not pinch when the solution gets in. Make such bubbles for games in the kindergarten group when there are a lot of kids. They push, soapy liquid spraying into their eyes. But an adult shampoo will do.

Run the mixture like this:

1. Dilute 200 ml of shampoo in 400–500 ml of water.
2. Lather, let it brew for a day.
3. Add glycerin - 6 tbsp. l. or granulated sugar - 6 tsp.
4. Refrigerate for a couple of hours.
5. Set up a soap experiment with kids of any age without fear for the eyes.

This is interesting! Jean-Baptiste Chardin was the first among famous artists to depict soap bubbles on canvas. The work dates from 1734. It depicts a man blowing a transparent balloon from a straw, and a child watching with admiration.

Bath foam solution

Make soap balls in the tub while bathing. This is often done by kids. Let's use their experience.

A solution for soap bubbles with your own hands from bath foam is easy to prepare, and the balls do not burst for a long time. The mixture will consist of simple ingredients:

• boiled water - 100-120 ml;
• bathing foam - 250-300 ml.

If you want the bubbles to be touch-resistant, add 30-40 g of glycerin. It is not necessary to infuse the mixture.

Important! After boiling, a precipitate (scale) remains in the water. Try not to add it to soapy liquid. It is better to carefully drain the water or strain without shaking. Scale flakes prevent bubbles from forming. The ball simply does not inflate due to the gravity of the solution.

liquid soap solution

An easy way to create a soap show at home. They replace the classic recipe with laundry soap. Use the liquid version of the product so as not to wait for the pieces to dissolve in water. Balloons based on liquid soap will inflate easily and have a pleasant aroma. For the experiment, a baby remedy or any other without color and strong odor is suitable.

You need to dilute the mixture like this:

1. Take water - 20 ml.
2. Add 100 ml of liquid soap to the container.
3. Mix, refrigerate on the bottom shelf for 2-4 hours.
4. Drop a little glycerin - no more than 10 drops.
5. Let transparent balloons at home, while walking.

This is interesting! Every year on May 10, Samara hosts a holiday of soap bubbles. Participants in the children's show compete to blow the biggest, strongest and most beautiful bubble. The holiday is fun, and local kids come to an indescribable delight.

Washing powder solution

Hand wash powder bubbles are large and strong. They can be held in the palm of your hand for a couple of seconds. The production of the solution is long, but the end result is worth it.

Prepare the following ingredients:

• hot water (from 45 ° C) - 500–600 ml;
• 20 g of washing powder (without Lenor additives, antistatic agents);
• ammonia - 2 tsp, or 20 drops.

Mix powder, water, shake. Then drip ammonia and put the container in the cold for four days. After settling, strain the mixture through a fine sieve. The solution is ready for experiments.

Important! This mixture should not be given to babies under 3-5 years old for an independent experience of inflating balloons. Powder and ammonia can get into the baby's mouth if the professionalism in using the bubble tube is not yet at a high level.

solution with sugar

Before making the magic mixture, you will have to make sugar syrup with your own hands. It is not difficult:

1. Take sugar - 5 parts and warm water - 1 part.
2. Mix.
3. You will get a sticky mixture.

Now we can return to the bubbles. Mix the following ingredients:

• sugar syrup - 100 ml;
• grated soap - 200 ml;
• glycerin alcohol - 200 ml;
• water (35–45 ° С) - 800 ml.

Combine the components, shake, leave to infuse for 12 hours. Remove excess foam from top before use.

This is interesting! Sugar is needed in bubbles for strength and durability in flight. It plays the role of a strengthening lubricant on the surface.

How to make huge bubbles

Bubbles with a diameter of 1 meter are considered large. Various methods are used to make them.

Recipe with lubricant gel

You will need:

• water - 1 liter;
• Fairy - 230 ml;
• Gel lubricant (technical lubricant) - 120–150 ml;
• glycerin - 120-130 ml.

Mix everything except water. Then heat the water and pour into the mixture. You don't need to foam.

Now the miracle begins. Children experience indescribable delight from everything huge. And giant soap bubbles simply amaze their imagination.

This is interesting! The record for blowing a colossal bubble was set by the American company Beeboo Big Bubble Mix in 2005. The volume of the soap ball was 3000 cubic meters. It was a worldwide master class as the firm sells equipment for soap shows all over the planet.

Recipe with gelatin

The preparation of soap balls with gelatin takes place in several stages:

1. Dissolve 25 g of gelatin in warm water (500 ml). Take an iron cup, the dishes will have to be heated a little later on the stove.
2. Remove excess water - drain it, leaving a thick mass of gelatin in the container.
3. Add granulated sugar - 25 g.
4. Put the saucepan to heat.
5. Melt but do not boil.
6. Pour in 400 ml of water.
7. Add glycerin - 50 ml, Fairy - 100 ml.
8. Stir quickly. Do not shake until foamy.
9. The solution for giant bubbles is ready in the store.
10. Start launching the soap balls immediately after the mixture has cooled to room temperature.

This is interesting! From a scientific point of view, a soap ball is a multilayer structure with a cavity inside. Water in different layers is attracted by molecules due to well-known physical laws (attraction and others.). If the layers are too thick, then the H 2 O atoms collapse, forming a single whole - a drop. Glycerin delays this moment, not allowing water molecules to be attracted.

Check out this video for tips:

How to make durable bubbles

Tight bubbles are not made with a soap base. For jumping and durability, other ingredients will be required:

1. water heated to 50-60°C - 300 ml;
2. washing powder - 25 g;
3. ammonia - 1 tsp;
4. glycerin - 150 ml.

To prevent water balls from bursting, put the mixture of components in the cold for 2-3 days. Pass through a sieve and cool for another 10 hours. Balls from a mixture of glycerin and alcohol can be held in the palm of your hand, played like a jumper.

This is interesting! Valery Koval, a Russian schoolboy, came up with a new technology for blowing strong bubbles of huge size. He added rubber glue to the solution. The result is a soap ball with a diameter of more than two meters.

Another interesting recipe for strong bubbles you can watch in this video:

What can be inflated

A classic device for creating a holiday from soap balls is a straw and a straw. Today, showmen, and simply resourceful children and parents, use more modern options for such an activity:

• purchased bottles with a stick;
• tube from a ballpoint pen;
• a gun with a mechanism for inflating bubbles;
• plastic bottles (from soda) without a bottom;
• tennis racquet;
• cracker for beating carpets;
• homemade wire stick;
• plastic funnel.

If desired, you can find many devices and ways to blow the largest, most durable curly and classic bubble. Turn on your imagination and play!

Bubble Fun

There are many group and individual games with soap balls. They can be used at children's parties, at home to cheer up sad winter evenings.

Soap matryoshka

You will need straws for cocktails, soapy water, a saucer. Play with children like this:

1. Pour bubble liquid into a saucer.
2. Insert a straw into the puddle. Blow a big bubble. It stays on the plate.
3. Take out the straw, then put it back inside the balloon, make another smaller bubble.
4. Repeat several times. Bubbles should pout inside the previous ones, hiding, like in a nesting doll.
5. Arrange a competition for the number of components inside the main ball of soap.

soap war

Buy a soap bubble generator. This is a special mechanism for blowing water balloons of different sizes. For a company of preschoolers, a mechanical option is suitable, which is convenient to hold in your hands. Inside the gun there is a container for refilling the solution. The crumbs press a key, and the gun releases a series of soap balls.

The task of the children is to hit the enemy with bubbles. You will have to fill the container with a large number of playing children often. But everyone will definitely like the game.

frost

This is a science experiment at home. In winter, take your children to the balcony or play outside. Blow the balloon carefully, don't make it big. If the temperature around is less than -7ºС, it will freeze and collapse. Children will love watching the process of freezing the balloon.

Soap bubble drawings

It is necessary to prepare colored solutions for inflation using natural dyes. Pour them into small bottles. Give the children straws, white A4 sheets. It is necessary to inflate multi-colored balls and burst on paper to form a drawn circle. You can create a picture indefinitely, combining colors, drawing silhouettes with soapy lines. Adults can also join the team.

Balloons-boats

Running water circles in the bath will give children a lot of fun. Make the bubbles float on the water, blow in the direction of travel. Arrange a competition "whose balloon will swim to the edge first and not burst."

soap jumper

This is a play set: gloves and bubble solution. The child inflates an elastic soap ball, with the help of gloves plays with the jumper for a long time. You can’t hit hard, otherwise the bubble will quickly burst. The task of the child: to learn how to calculate the force of impact, intuitively guess where the ball will land, and put his palm towards him.

The fascination of children of different ages with soap bubbles is difficult to explain. Light water balls fascinate, captivate boys and girls. Learn how to make bubbles at home with simple ingredients and make a surprise at home.

IMPORTANT! *when copying article materials, be sure to indicate an active link to the first

Good afternoon I don’t know how it is for anyone, but my childhood was bright. And so he was made by the love of his parents, good friends, a lot of fun games, fun holidays and balloons with soap bubbles. I remember well that once my mother showed me how to do it, and since then our yard has become like a washing machine drum, it literally drowned in bubbles and foam!

Many years have passed since then, but I know for sure that as soon as my son grows up, I will definitely tell him about this recipe. For now, I'll share it with you. And not only to them, I have a new tool in my arsenal, with glycerin . I'll probably start with him.

But! First, I’ll tell you about the most important secret for any solution !!!

The prepared solution should “infuse! He needs from 2 to 24 hours to get the desired stunning effect!
Here's what we got:

The strongest bubbles in the world! Secret Ingredient

Intrigued? Believe me, it's worth it! And it is better not to believe, but check.

So what we need:

• Water - 300 ml;
• Detergent (liquid) - 100 ml;
• Glycerin - 50 ml.

In order for everything to work out perfectly for us, we will take into account one moment. Water must be purified. If it is not possible to filter it well, then it will be enough to boil. But we need water at room temperature, not hot.

Guessed? The secret agent is glycerin. We need it to make the soap balls especially strong, non-bursting . But it also ensures long-term storage of the product itself. It can be done in advance. It will not lose its properties even after a few days.

We stir all the ingredients, but not until foam, just combine them. All! You and your baby are ready to meet a warm day with balloons shimmering in the sun!

giant bubbles

This recipe also makes giant bubbles. You can choose the size yourself, knead the mixture immediately in a bucket or basin where your bubble building will fit.

One condition - the weather must be calm, otherwise the wind will immediately burst all the bubbles.

We tie the rope, which is shorter with the ends to the ends of the sticks, with a long piece of rope we do the same, after putting a nut on it like a bead. It turns out a triangle.

We lower the sticks with a rope into the bucket, carefully slowly take them out when folded, and slowly spread the sticks. More details in the video, it is in English, but everything is clear there:

The easiest and most affordable bubble solution

Now the promised secret from childhood without glycerine . It is made in a couple of minutes, and gives impressions for the whole day.

What is needed for it:

• Water - 150 ml;
• Liquid detergent - 2 tsp;
• Sugar - 1 tsp.

Cooking soap bubbles at home recipe :

• Mix detergent with sugar.
• Add water and mix again until smooth.

The same strength that glycerin provided in the first case, now sugar helps us get it.

Innovative tool

And another surprise for my friends! A new way to make a solution. In addition to water, sugar and detergent, it will need:

• Washing powder;
• Shaving foam.

Everything is taken in equal proportions.

But besides the solution itself, I will share some tricks that help to make a lot of balls at a time, inflate large bubbles or how to manage if there was no special ring for inflation at hand.

Life hacks for launching soap bubbles

How to replace the ring. From the wire, you can twist a loop of a suitable size. Or, take apart an old pen and blow bubbles out of a plastic rod.

Many at the same time. Tie the cocktail tubes together with an elastic band (with the corrugated part cut off). To make the design strong, tie them on both sides.

especially large. So that the balls do not burst prematurely, and they can be inflated very large, double strength is needed. To do this, add both sugar and glycerin to the solution. And now we will build a tool with which we will get these bubbles.
We will need:

• 2 wooden skewers;
• 2 cocktail tubes;
• Yarn meter.

Step by step production:

• We pass the yarn through the tubes.
• We tie the ends of the thread. We cut off the ends.
• We push the tubes so as to get a rectangle.
• We put skewers inside each tube to strengthen the structure. Before that, cover each skewer with glue.

Soap bubble generator

And how do you like this idea? Why strain and inflate, you can have a whole party with soap bubbles, a good idea.

Here is the design with the motor:

OK it's all over Now! The secret of my glorious childhood is revealed! I hope it will serve you in good stead, and with its help you will give happiness to your children. If you know how else you can make a solution, write. And yet, tell us about the results if you took my advice. For some reason, I thought now that in this way your kids will make a real sensation in the yard. And their parents will ask what is the secret of eternal bubbles. Tell them about the site, let them come and learn about everything in the world that makes us better and happier! And don't forget to subscribe so you don't miss any new articles.

That's all, see you soon!