How to make cabbage rolls from Chinese cabbage. Miniature cabbage rolls from Chinese cabbage: the best recipes with photos

House plants occupy the entire window sill and block each other? Or only grass for cats takes root at home, because animals do not treat the rest of the flowers very humanely? We offer a solution to this problem: hanging plants from the ceiling or walls. Our selection of master classes will help you make a hanger or a shelf on your own, which will look very modern and stylish!

floating shelf

What you need:

• wooden plate;
• scissors;
• yarn.

How to do:
Cut 50 strips of yarn about 3 meters (a little more is better than less). Gather them together and tie a knot exactly in the middle - this will be the center of the suspension. Divide the ends of the threads into 4 equal parts. Then divide each of the parts into two more and twist these parts together; can be divided into three and braid a pigtail.
You just have to throw the 4 resulting bundles (or pigtails) over the object on which you hang the composition and tie a knot. Place a plate in the middle: it will hold firmly, and you can put small flowers on it. For decoration, a yarn tassel can be tied to the bottom knot.

Macrame


What you need:

• yarn, ropes, or even an old T-shirt cut into strips (unless, of course, you decide to weave a rug out of it);
• scissors.

How to do:
The macrame technique is great for creating graceful hangings for plants in pots. Step-by-step master classes in the pictures below will help you master this simple technology.

Tiered shelves with holes

What you need:

• wooden plank;
• several cache-pots in the form of a cylinder or with an extension on top;
  rope;
• metal ring;
• drill and drill 10mm;
• saw;
• sandpaper and paint and / or stain (optional).

How to do:
Turn the planter over and place it on the board, circle, then measure 2.5-3 cm on the sides and draw squares around the circles. It is on them that you need to cut the board with a saw, so it is more convenient to start closer to the edge / corner. Already on the sawn boards, draw a smaller circle inside the circles already existing there. It will be optimal to step back 6-7mm from the edge or play it safe and measure the diameter of the planter in the part that should be above the shelf.
With a drill, make holes inside the small circle until the hole is large enough for the saw to fit through. Cut out the entire circle with a saw. Then drill a hole in each corner for the ropes. Pass the ropes, tying a knot under each shelf, and tie everything to a metal ring on top. The hanger is ready! You can additionally decorate it before threading the ropes: sand the boards and saturate them with stain, paint the pots.
Important: if your planters have a hole at the bottom, it is better to make the bottom shelf without a hole by placing a planter on a saucer there (glue the saucer for reliability): the fact is that water from the upper planters will flow down.

It is difficult to imagine your favorite garden without flowers, as they are a stylish addition and an integral part of landscape design. Compositions planted in unusual, original pots for plants made by oneself look especially impressive. Creating beautiful flower pots with your own hands from improvised material is not only a useful, but also a very exciting process. A step-by-step master class for making original planters with a detailed description and a visual photo, later in our article.

What can you make a pot with your own hands

Today, specialized stores offer a wide range of various decor and decorations for the garden for every taste, including original flower pots. However, even with such an abundance of goods, it is not always possible to find what you need exactly. There is only one way out of this situation - to try to make a pots yourself.

Oddly enough, but the most unusual decorative flowerpots are obtained from ordinary material. You just need to be smart and give free rein to your wildest ideas and fantasies. Planters from household items will look most harmonious in the garden. It is they who give a real zest to your yard, creating the effect of grace and refined nobility.

The second life of old shoes

Surely in the country you have old shoes that you haven’t worn for a long time, but you didn’t dare to throw them away either. The ideal way to breathe new life into it is to make an original flower garden out of it.

To do this, you need an unnecessary pair of old shoes, the help of skilled hands and a little free time.

Walkthrough

1. Pour fertile soil (preferably black soil) into the bottom of the boot, then plant seeds or seedlings of your favorite plants in it;
2. Pour the resulting decorative flower garden with warm water and place it somewhere in the visible side of the house;
3. To prevent excess moisture from accumulating inside, several small holes can be made in the sole;
4. To give the composition a more interesting look, the boots can be painted in any color you like.

Decorating a shoe with your favorite flowers and plants is a great idea for a creative gardener.

Absolutely any footwear can be used as a mosnov: rubber boots, sneakers, sneakers, sandals, galoshes, low shoes, sandals, cloaks. As for flowers, it is better to give preference to bright, unpretentious, undersized plants.

Important! Planters from old shoes should have holes to drain excess water. Otherwise, the roots may rot, which will lead to the death of the plants planted in them.

Flower pot made of cement, rags and burlap (photo)

A flower vase made of cement and rags looks very original and spectacular. The method of manufacturing the product is quite simple and does not require special skills and tools. It is enough to have cement mortar and unnecessary textile waste on hand.

Important! Before drying, a rag soaked in a liquid cement mortar can take any shape, so such compositions can be made in any form.

So, for work we need:

• Cloths of rags of the required size. You can use ripped burlap from cereals or sugar;
• Components for the preparation of concrete (water, cement, seeded sand or fine gravel);
• Patterns made to your taste. You can use ready-made ones, such as a bucket, a saucepan, an old vase, etc.

Step-by-step master class for making planters

1. Cook according to the required proportions. To make it easier to work with the material, the solution should have the consistency of liquid sour cream;
2. Wrap the template around with a dry cloth. If the size is right, dip it in the solution and hold it there for about a minute;
3. Throw a dampened rag over your workpiece and let it dry for 12 hours;
4. After complete drying, remove the pattern. A cache-pot of cement and rags is ready.

Good to know! The setting and hardening time of cement in the sun is reduced to 2-3 hours.

If you don’t like the cold and gray color of concrete, or you are simply tired of it, dilute it with bright contrasting colors, so the planter will look more elegant and more fun.

Miniature garden from tin cans (photo)

One of the most popular materials for making flower pots are tin cans.

• Why are they so popular among art lovers? Everything is very simple. Metal cans come in many colors, shapes and sizes, so you can create a magnificent flower arrangement from them that attracts admiring glances.

The indisputable advantage of making such floral decorations is the minimum return of effort and time while obtaining the most creative result.

To make a planter from tin cans, the following materials are usually required for work:

• Cans;
• Nails and hammer;
• Colored acrylic paints, fly brush;
• Wooden base for fixing jars

Manufacturing guide

1. To give the composition certain outlines, all cans are painted in bright colors;
2. After complete drying, a hole is made in the bottom of the jar to drain excess moisture;
3. It remains to fix the jars to the selected base, pour soil into them and plant flowers.

To add more expressiveness to the product, patterns can be applied to a slightly dried surface or decorated with various buttons, ribbons, beads or beads.

An unnecessary teapot as a flower garden

Found an old kettle in the garage? Don't rush to throw it away. From it you can make a beautiful decoration that will look original in your garden. In addition, the creation of crafts with your own hands will help not only realize your creative potential, but also save money.

To return the product to its original appearance, a can of acrylic or aerosol paint will help. Using a stencil, various patterns can also be applied to the surface of the teapot.

Important! So that the paint does not swell over time, the surface must be well prepared before application.

The planter from the teapot is mobile, and if necessary, it can be moved to another place

• For those who do not want to bother with painting kettle, you can leave everything as it is. The shabby and tarnished shade of metal with a slight touch of time has its own special charm. The cold shine of polished metal looks no less advantageous.

Using an old teapot as a flowerpot is quite a bold and creative decision.

Vase from improvised means: a step-by-step master class

Today, craftsmen and Hand Made craftsmen make original planters with their own hands from almost any material that comes to hand. Ideas for creativity and inspiration can be drawn from anywhere, including the Internet.

The photo of beautiful planters placed in our article proves once again that there is no limit to a person’s imagination. Innovative solutions and unusual super ideas allow you to create real works of art.

• If wooden sticks glue together into a hollow cube, so that each new row forms a free space, and each subsequent one overlaps it, we get an unusual planter that is perfect for small plants. It can be placed anywhere, for example, on a windowsill or hung on a rope, after planting indoor flowers in it.

• Plastic bottles. Probably not a single garden craft or decoration can do without their participation. Working with this material is very convenient and simple, the main thing is to observe safety precautions. The simplest thing you can make out of is a hanging flower pot.

However, plastic bottles can be used not only for decorative purposes. You can plant seedlings of vegetable crops in them, so this material is also a favorite among amateurs.

• You can weave a flowerpot with your own hands from an ordinary rope. In this case, the shape of the product can be different: cylindrical, round or cone-shaped, the main thing is that the planted plant fits freely into it. As a material for weaving, some craftsmen use thin vine branches or artificial rattan threads.

• If you approach the creation of a decorative flower pot more thoroughly, you can make a more interesting and large-scale composition. Suspended old waste boiler over an impromptu fire of flowers and logs, you can get a very interesting result that will not go unnoticed by your guests.

Important! To highlight and emphasize the beauty of the composition you created, you can protect it with a border of ordinary stones, slightly drowning them in the ground.

Boxes for flowers and seedlings

• Summer residents are resourceful and thrifty people, so they never throw anything away, including cuttings from boards and other lumber. After all, they make excellent wooden boxes which can be used as flower pots.

In order to make planters from boards, you can get by with minimal carpenter skills, and only a hacksaw, nails and a hammer are needed as tools.

• Good to know! Wooden boxes can also be used for planting seedlings of various crops. Only for this, in the upper boards, it is advisable to make special holes for the hands so that they can be conveniently and safely carried.

Beautiful flower beds from old things

Oddly enough, but an old bicycle that has not been ridden for a long time can still be useful to you as a decorative decoration. It is not necessary to violate the integrity of the structure. Just use it as a living flower bed. Additional contrasting elements in the form of flowers and plants will turn an old bicycle into a real masterpiece of art.

Planter from a bicycle - everything ingenious is simple

• Showing imagination, a unique hanging decoration with flowers can be obtained from the usual bird cages. Just place a pot or container with low plants in it and decorate with some decor.

Important! A planter from a cage will look more elegant and noble if you use a decorative vintage cage in the Provence style for it.

• For craftsmen with golden hands, make decorative planter for a summer residence with your own hands in the form of a cart, it will not be difficult. This will require a special tool and certain skills in handling wood and metal.
• To improve your mood and bring yourself a lot of positive emotions, you can quickly and efficiently make flower pots from ordinary trash cans made of shiny metal. For ease of movement, furniture wheels rotating in different directions can be screwed to the bins.

As you can see, having the right material at hand, it is very simple to make a flower pot for the garden with your own hands. For the manufacture of simple products, no skills are needed. Even a child can cope with this task. As for products more complicated, then you can’t do without the help of adults.

The creative process of creating a planter is not only creative, but also educational. Therefore, even the smallest children can be involved in this exciting activity.

Let's see how you can transform your favorite indoor flowers? For example, if you create a flower pot with your own hands, then such decor will please the eye and add zest to the interior. In addition, having equipped flower stands and / or shelves for flowers with your own hands, it will also become convenient for you to take care of your pets.

Pot design options for indoor flowers

What is the difference between a planter and a regular flower pot? Translated from French cache-pot means "to hide the pot". Thus, the planter is a decorative "wrapper". Of course, a clay pot will be the best home for flowers, but it quickly loses its attractive appearance, since ceramics let water through and stains appear on its surface that cannot be removed. Glaze is often used as a protective film, but it cracks and crumbles over time, and then the pot will either have to be replaced or decorated. In this case, a planter comes to the rescue - with its help you can easily hide unsightly places and create decor in the same style.

If you have a couple or three pots, then the easiest way is to arrange them beautifully on the windowsill. But if there are more than a dozen colors, then placement can be a problem. The most common way to hang a planter is to use ready-made hanging hooks or make holes for a rope. But you can make the mounting method creative.

You can organize a simple crossbar or build a whole structure under the ceiling, on which, for example, hang several.

The design of a one-piece planter does not provide for drainage holes, and openwork ones do not retain excess moisture, so this must be taken into account when watering.

Or here is such an idea of ​​\u200b\u200bhanging a planter, even those who can’t do it can implement it:

If you need to place a lot of flower pots in a small space, then this idea is for you!

With the help of simple tricks from wooden blocks and a rope, you can make a whole shelf for flowers with your own hands by equipping hanging structures. More detailed instructions in this video:

Imagine, combine different ways, the more flowers you can place, the more comfortable your home will be.

Making flower pots with your own hands from scratch: materials and master classes

In this section, we will consider options for independent "cases", which are made separately, and then a flower pot is "populated" in them. For indoor planters, the choice of materials is unlimited and correlates only with the overall design and your preferences. The most common and used for hand made:

• cardboard,
• paper tubes,
• felt,
• recyclables.

From felt

From simple materials for needlework and children's creativity, wonderful things are obtained, you just have to apply your imagination. Look, a charming planter from.

Do-it-yourself stands and shelves for pots

Making a planter or decorating a pot is not all. This beauty needs to be put somewhere! Here you can not do without special shelves and stands. You can build a structure on the wall.

And you can order a whole bookcase on the floor.

Or here is such a bookcase-ladder.

And it is not necessary to ask someone. If you buy blank parts sawn to size in a store, then even a gentle female hand can cope with the assembly. Like in this video:

But it is much more interesting to turn on the fantasy and adapt unusual objects under the shelves to place the flower pots. For example, pallets. Paint with a stain or dark paint and now - a great shelf is ready.

And in this tool trolley, various plants coexist perfectly, creating a mini-.

"Cross" will not advise bad! :)

Categories ,

Beauty and comfort in the house is not only perfect cleanliness and exquisite interior, consisting of expensive furniture and designer renovation. The harmonious design of the room consists of many details and decorative elements, which can often both attract attention and repel the lack of taste.

Indoor flowers are an invariable decoration of any home, giving the room a special aura of home and freshness. But sometimes, flower lovers do not have the opportunity to place the number of plants in the room that they would like. Or, due to a change in the style of the interior, indoor plants in simple pots do not harmonize with the rest of the details.

But do not be upset! After all, you can diversify the interior and place more flowers with the help of a planter - a decorative item that will emphasize all the advantages of the environment and indoor plants. You can buy a flower pot, or you can create it yourself, which will give the interior individuality and originality.

Common types of planters

Before you start making flower pots with your own hands, it would not hurt to learn about its varieties. Indeed, today there is a huge selection of flower pots, which are conditionally divided depending on the purpose:

• desktop planters - it is customary to place them on cabinets, tables, racks, taking into account the stylistic decision;
• floor planters - located in spacious rooms and used for tall indoor plants;
• wall planters - suitable for small rooms where it is important to save space;
• hanging planters - in addition to originality, this type of planter allows you to place indoor plants quite compactly;
• planters for the garden - perfectly enliven the space of the site and give the site a complete look.

What materials are used to make pots? A decorative flower item can be made from just about anything, especially if it's handmade. During the creative process, all improvised means are used - from natural materials to old things or various small decorations.

• Tree. This is the most common material for creating decorative containers, when choosing which it is important to take into account its resistance to moisture, as well as the processing of the material itself.
• Glass. A planter made of this material is a versatile and practical item, thanks to which you can track the moisture level of a plant.
• Plastic. Inexpensive and easy-to-care containers have long been in demand by many housewives due to their availability and a variety of colors.
• Ceramics. A more expensive option for pots, but also more diverse. Moreover, ceramics are easily amenable to some changes, for example, drawing a picture or glazing.
• Metal. Very unusual flower containers made of stainless steel or forged elements will give the interior a special expressiveness and emphasize the sophistication of indoor flowers.

Cache-pot in home decor with your own hands

Flower and hardware stores have a huge selection of flower pots. Here you can choose by size, color, and also depending on the location of the container.

But it so happened that each person is individual, therefore, in his own house, he expects to see only exclusive items that will emphasize the taste of the owner of the house. With some needlework skills, any housewife can create a real masterpiece that will refresh the interior.

So, let's begin.

Planters with lace

To diversify plain plastic pots, you can use pieces of bright fabric or lace. In addition, for work you will need:

• scissors;
• glue;
• pot;
• glue brush;
• material for gluing (lace, braid, ribbon).

Operating procedure:

• To begin with, the outer side of the pot should be wiped with alcohol in order to degrease the surface.
• Apply the necessary contours, in place of which the decor will be located.
• Lubricate this area with glue, without going beyond the contours of the pattern.
• Press well and leave to dry completely.

For a more durable fixing of decorative elements, you can use a glue gun, which will give the decor strength. If desired, you can decorate the pots with braid, bright buttons, beads and other interesting little things.

Planters from branches

An equally interesting option for creating a flower pot is a planter made of wooden circles, the manufacturing principle of which is similar to the previous one. Only for this you need to use tree branches in the work, the diameter of which does not exceed 2 cm.

To prepare the material, you need garden scissors, with which we cut wooden mugs with a thickness of no more than 1 cm

Having previously degreased the surface, we attach the material to the pot one at a time, carefully applying a small amount of transparent Moment glue.

Having pressed it well, we leave it in a place inaccessible to children until it dries.

In order for the planter to serve for a long period, it is recommended to varnish the product for wood.

No less interesting options can be obtained by gluing river pebbles, shells, dry moss, cork, tree bark.

Wooden planter with twine

An old wooden pot will sparkle with new colors if it is decorated with twine. To do this, apply glue to the surface and slowly press the rope, wrapping it around the pot. It is very important to fasten the rope at the end so that the product does not lose its original shape.

Having previously drilled holes for the rope, you can build a hanging planter with your own hands. To do this, carefully thread the twine into the holes and secure it well.

Branches or bamboo planters

Natural materials are the best way to decorate the interior, as they are distinguished by their natural beauty and environmental friendliness. One of the options for creating a planter is a planter made from cane or bamboo branches.

For this you need to prepare:

• chopped even branches or bamboo;
• twine;
• scissors;
• glue "Moment" transparent;
• dense coarse fabric (burlap, linen);
• plastic pot.

Operating procedure:

• Before you start tying the sticks together, they should be aligned so that the product looks aesthetically pleasing.
• Then we tie the branches together with twine along the edges (2-3 cm to the edge), tightly tightening so that the canvas does not crumble.
• Apply a layer of glue to the outer walls of the pot and evenly glue burlap or linen.
• We tie a cloth of sticks around the pot, and tightly tie the upper and lower parts.
• The cache-pot can be additionally decorated with flowers made of twine or burlap, which will give the product a special effect.

DIY hanging flower pots

Hanging planters are often used by those who need to free up more space in a house or apartment. This decor allows you to move around the house without obstacles, so this type of planter can be called the most popular.

In this way, you can perfectly decorate the garden with your own hands. But before that, it is worth remembering that the materials for hanging planters must be resistant to high temperatures and the adverse effects of precipitation. For such purposes, a planter from a plastic bottle will be suitable.

Cache-pot from a plastic bottle

There are many methods for making decorative containers from plastic bottles. One of them can be decorated using the decoupage technique.

Necessary materials:

• a plastic bottle with a volume of 1-1.5 liters and a flat bottom;
• scissors;
• basis for decoupage;
• napkins for decor;
• brushes;
• varnish.

Operating procedure:

• Prepare the bottle for work by thoroughly washing and wiping.
• Apply a thin layer of foundation, evenly distributing it with a brush.
• After the base dries, it usually takes 20-30 minutes, apply surfactant glue, also smoothing well.
• After separating the top layer of the napkin, apply it to the container and smooth it with a brush or fingertips.
• In order for the surface to dry well, it is better to leave the product overnight at room temperature.
• Then the pots are varnished and dried.
• We pierce holes on both sides of the pot with a hole punch and thread the rope with which the plant should be tied to the mount.

Features of vertical gardening

Fans of unusual plant decor will surely like “living walls”, or vertical gardening. Today it is a favorite technique of designers around the world, emphasizing the exclusivity of expensive interiors. Professional "living walls" are not cheap, especially if everything is done with the latest technology, including automatic watering.

Vertical gardening has a number of advantages:

• air saturation with oxygen;
• space saving;
• improves the appearance of the walls and complements the style of the interior;
• the abundance of plants on the wall are a source of additional air humidification;
• division of space into zones.

Despite the apparent difficulties in creating such walls, having become well informed with the necessary information, you can create an unusual structure on your own. It is worth recalling that this type of landscaping can be built both in the house and in the garden.

Planters for this type of landscaping can be wall-mounted and conventional, depending on the design and location of the plants. To create wall-mounted pots, containers from plastic bottles are suitable, which are easily attached to a vertical structure or wall with a rope. To make the container more aesthetically pleasing, you can decorate it with a braid to match the interior. This decor is a macrame or crocheted canvas.

An equally interesting option is pockets made of dense fabric in which climbing plants can be planted. This option is good for decorating the garden, in which you can build metal grills or special racks.

On special frames made of stepped wood, you can place flowers in flowerpots, the surface of which is decorated with natural materials.

A great option is a planter decorated with moss. All you need is dry moss and clear glue. The process of creating such a pot will not take much time, but the result will exceed all your expectations - an original and exclusive decor item will become an unusual decoration for a garden or home.

A cache-pot decorated with river pebbles is an interesting option for vertical decoration. The process of creating such an item will take a little longer than in the case of moss, but it's worth the effort. This decor is distinguished by a non-standard approach and originality.

Equally successful in creating a beautiful flowering wall in the garden are suitable plants. Curly and ampelous flowers are ideal for this case, which, with proper care, in addition to landscaping, will create a whole riot of floral colors.

Decorating a home is a time-consuming and interesting activity that requires creativity and the desire to make the interior unique. To do this, they use all sorts of tricks and tricks, just to stand out with originality and non-standard solutions.

Making a planter with your own hands is one of the ways not only to refresh and diversify the interior, but also to prove yourself as a creator and artist who creates incredible masterpieces. After all, needlework has always been a part of art, which in turn contributed to the manifestation of human creative abilities.

So, create with pleasure!

Any room has a finished look if it contains plants. They not only decorate the interior, but also give comfort and bring joy. In addition, plants are known to purify the air, which is very important especially for city dwellers.

Breeding plants is a huge job that requires time and skills. Each plant has its own characteristics, living conditions, needs a certain humidity, temperature, light.

Gutter: a simple DIY hanging garden idea

An original idea for a hanging garden will be a gutter; this uncomplicated device will wonderfully decorate both city apartments and any garden or cottage.

In order to turn the idea into reality, you will need gutters (several pieces), hooks, metal cable and clamps. We will make holes along the gutter and on both sides we will thread metal cables into them, we fix the cables from the bottom of the structure with clamps. On the next gutter, according to the first example, holes should be drilled and cables should be threaded parallel to the first. The design will not move if the attachment points are observed strictly under each other. It remains only to fix the hanging garden on hooks, fill in the ground and plant the plants. Master Class:

Preparing the gutter

Clamps and cable

Drilling holes

We stretch the cable

We put fasteners

We hang the gutter

We plant plants

Kindergarten is ready

A similar idea of ​​hanging gardens, implemented more simply using plastic bottles. It doesn’t look so impressive, but it’s done more quickly, simply and precisely by everyone with their own hands.

Hanging baskets from climbing plants

There is a huge selection of special hanging pots with a drip tray for excess moisture. They can be made from any material of wood, metal, woven from branches, ropes. In addition, you can easily make a flower hanging pot yourself without much effort from improvised means.

Plants hung on a special planter made of rope or cord look very nice. A good choice for such decorative dishes would be a fern or ivy hanging in the air, as if hanging in the air. Or use regular hanging pots for flowers and houseplants.

Hanging flower pots - the easiest solution

Using saw cuts of various tree species, you can make original hanging pots for the same ivy, as well as vines. The original will be a suspension of sticks or bamboo slats, as well as a piece of wood in which you can make a small depression, here you can successfully combine several types of plants that do not have a highly developed root system. Or you can use bags made from ordinary fabric. So you can decorate the fence in the country.

Baskets made of galvanized wire are widely used. They are the most durable and rather unusual design solution. You can also make a hanging garden from ordinary galvanized or painted buckets.

An interesting idea is to make a hanging garden without using any pots or things that replace them at all. We will just have moss balls suspended on twine, from which green plants grow. Here is the instruction "", but what happens in the end:

Hanging garden - a work of art

Hanging garden in pockets

A hanging garden in pockets is a rather unusual solution for placing plants. You can sew the pockets yourself or use a ready-made organizer for tools, you will also need a cornice and hooks.

The most important thing is to find a place for our future device under a canopy so that in rainy weather excess water does not get into the pockets. We install the cornice in the chosen place and hang our canvas with pockets on hooks. Now we fill the pockets with earth and plant seedlings. It remains only to attach a wooden block for gravity and the hanging garden is ready! Instruction:

Hanging garden in pockets in the country - we grow greens

We fasten the bar

We plant plants

We pour the earth

We sew pockets

Hanging garden upside down

A very creative idea for a hanging garden is to use special inverted pots. Plants in them do not grow as expected, but upside down. These original pots are called Sky Planter - search the Internet, and Patrick Morris came up with them.

How it works:

Hanging Garden: New idea from old boots

A pair of old boots lying around in the closet will fit well in any garden. For decor, any boots from any material and absolutely any size are suitable. We will make a hole on the inside of the shoe and thread a hook into it, which can then be fixed anywhere. The main thing is that the hooks are strong, since a boot with earth can weigh quite decently, and when watered, our “flower pot” will become much heavier.

Ampelous plants of various colors and varieties will look especially good in such an interesting fixture.

Hanging pots for the garden with ampelous plants Liked the article? Share on social networks!