Figurines from mastic: a master class for beginners with photos, videos and detailed explanations. Spider-man figurine from mastic, figurine modeling

- the height of skill: here you need to observe the proportions of the human body, convey facial expressions and emotions. If you decide to try yourself in this business, then welcome to our master class.

What cakes can be decorated with human figures? Almost any. It can be a dessert with a mischievous nurse in honor of the Medical Worker's Day, or it can be a sweet with the hero of your favorite movie or TV series for a teenager's birthday. However, the most popular are the wedding figurines of the bride and groom. We will devote most of our article to them.

Figurines on a wedding cake: what are they

Long gone are the days when wedding cakes were decorated with a pair of rings, banal pigeons (swans) or plastic (porcelain) dolls. Recently, the fashion for mastic has dominated the confectionery art. Both the coating for the cake and its decoration are made from this material. This is understandable. Mastic allows you to implement the most daring ideas without restrictions. Even such traditional attributes as figures of newlyweds from mastic can be made very original.

Option 1. Unusual placement

Mastic spouses can be located on the sofa, in a boat, plane, car, and even in a tractor.

Option 2. Original plot

If the sense of humor of the spouses allows, you can present them with a cake, where the bride holds the groom in her arms or tears him away from the computer, etc.

Option 3. Non-traditional execution

Such figurines can be made in the style of a kind friendly caricature, with slightly changed body proportions.

Wedding figurine "Hostage Groom": step by step instructions

To make this composition, you will need mastic of three basic colors: white, black and flesh.

1. We sculpt the heads of the newlyweds. To save material, place a cotton ball or polystyrene in the center. Here it is important to convey the emotional coloring of this scene, so we pay great attention to the elaboration of facial features.

2. Let's start with the torsos. The groom is dressed in a black coat with a vest and tie. The bride is in a long white dress without straps.

To fasten the head, a wooden toothpick is used, the docking of the remaining parts occurs by wetting individual sections of the figurine with water.

3. Since the bride and groom are in our composition in interaction, you need to bend the arms and legs, set the angle of inclination for the figures.

4. We collect and decorate the figurines. We make a silver pattern on the bride's dress, add a veil, a wedding bouquet, earrings, and rhinestones to her hair.

We “fetter” the groom with a chain, next to him we have beer cans.

5. We give the figures a glossy shine with a brush dipped in sugar syrup.

Now the composition is ready to be placed on the birthday cake. It remains to be hoped that the bride and groom will appreciate your joke.

The art of modeling from mastic has recently burst into cooking. Now almost all pastries and cakes are decorated with figurines and various patterns from mastic. In addition, completely unimaginable forms can be sculpted from this mass, which together can create a whole cartoon plot or a romantic bouquet.

What is mastic, is it difficult to make figurines out of it?

Mastic itself is an adhesive and astringent, which, moreover, is edible. If it is kneaded correctly, then it will be similar in its consistency to plasticine.

There are several varieties of this mass. It is created from different products and kneaded in different ways. The most famous:

• Honey: It has a softer look. Suitable for modeling almost any figures, does not crumble and does not fall apart;
• Mastic based on gelatin is distinguished by its high speed of solidification and hardening. Most suitable for preparing the smallest parts;
• Dairy is one of the most common. Condensed milk is used as the main ingredient. Ideal for creating a base and a solid cover for a cake, as well as medium-sized figurines;
• Marzipan is used to cover the cake. It is very soft and not suitable for sculpting figurines;
• Industrial or universal mastic is bought in stores. It is used both for modeling and rolled out for the base. It practically does not differ in taste from home;
• Flower - this type of mastic is best suited for creating jewelry where fine work with small details is required.

Each of these types is good in one way or another. In any case, you need to try different types in order to understand and adapt to this kind of delicious modeling.

Recipe for sugar mastic for sculpting figures at home

We take a suitable container (a wide bowl will be enough), sift the powdered sugar there, and then add the dry milk mixture. Mix and add condensed milk. Now you need to knead the mastic like dough. When kneading, lemon juice, cognac, dyes are added. The result should be an elastic mass with which it is pleasant to work and sculpt.

If you do not add dyes, then the mass should be matte.

Children's figurines from mastic for a cake with their own hands step by step: instructions for beginners

Mastic is good because you can make a wide variety of figures and decorations for goodies from it. This is especially useful if you need to decorate a cake or pastries for a children's holiday.

We sculpt a toddler from mastic step by step

To make such a cute peanut, you need flesh-colored mastic. To do this, when preparing the mass for modeling, you need to add a body dye.

Step 1. We make the torso. We fashion a small oval the size of a small chicken egg. We take a toothpick and make a hole just below the center (this will be the navel).

Step 2. We sculpt the head. We take a piece of mastic somewhere 20-25% less than on the body and roll it into a ball. Insert a toothpick into the top of the body. It will serve as a fastening element of the torso and head.

In the head with a toothpick, you need to make a couple of holes under the eyes. We sculpt the nose from a small piece of mastic: it should be a slightly flattened round circle with a diameter of about 4-5 mm.

We hold the mouth with a toothpick, while not forgetting to make stronger recesses for the dimples.

For the ears, take two small balls. We roll them up and with the help of a stack we make dents in the center. Glue them to the head.

Step 3. We fasten the parts: we put the head on the base (toothpick).

Step 4. Making handles. We take a couple of pieces, a quarter in size less than the head. Roll them into sausages. With the help of a toothpick at one end we make fingers.

Step 5 Attach the handles to the body. If the parts do not stick together well, brush over the mating areas with a brush dipped in water.

You can diversify the baby with a toy or other items you like.

Little mouse as a decoration

First of all, we prepare mastic of different colors. You will need yellow, light green, white and pink. For the eye and mouth, you will need black edible beads (powder). In the absence of black, you can replace it with dark blue.

From the tools you need to prepare toothpicks, a stack, a mold for the base (a glass or a glass will do), a sharp knife or cutter.

Step 1. We make a base out of light green mastic. We roll it out to a thickness of 3 mm. We use either a special form, or a glass (glass).

Step 2: a gift. We take the yellow base. We first make a ball, and then gradually move on to a cubic shape.

Pink mastic needs to be rolled out quite thinly: 1-2 mm thick. We take a knife or cutter, cut it into thin strips that will serve as gift ribbons. You also need to make a small bow out of them.

From the remnants of the rolled pink mastic, you need to make small peas (we use a special form). Their diameter should be approximately 1-1.5 mm. With the help of a stack or a toothpick, they are attached to a gift.

Step 3: mouse. White mastic is used to create the mouse body.

First we make a little body: we roll up the ball, then we try to give it a longer elongated shape. Next, we make paws, they are also a little teardrop-shaped. Using a toothpick, mark the stripes that separate the fingers.

We stick toothpicks into each part. We use halves for the paws, since they are small. We fasten the body with the paws so that one serves as the base, and the second is in the air.

For the head we roll up the ball, then we transform it: just below the middle we make a notch. We make a recess for the mouth and eye. We insert black beads there. We make a nose out of pink mastic.

We take a couple of small pieces, roll them into balls, after which we make indentations with the help of a stack - these are future ears. They need to be flattened well and cut off the bottom. We attach them to the head.

Now we put the head on the toothpick fixing the body.

The upper paws are made in much the same way as the lower ones, only they should be slightly smaller. We make the tail from a thin sausage, which should become thinner towards one edge.

Step 4: flower. We make the stem for the future flower from light green mastic. We roll it into a thin strip 3-4 cm long above the mouse. From a piece of pink base we make a flower. It can be cut in a special shape. With the help of a stack, we make indentations on the petals. Then we cut out another flower, but smaller and make indentations in it. We make the middle from a yellow piece the size of a pea, rolled into a ball. We fasten everything together. From the green mastic, add a small leaf, which we add to the stem.

lion cub

You will need 4 colors of mastic: yellow, white, brown and black, as well as tools.

Step 1: Sculpt the body and head. The head should be in the form of a ball, the body - in the form of a drop. From white mastic we cut out inserts on the body of a teardrop shape.

On the head for the mouth, add a little bit of white mastic using the bent tip of a sharp stack.

We make eyes and fashion roundels near the mouth.

Step 2. We make paws from yellow and white mastic: we sculpt the main part from yellow, and the part with fingers from white. Don't forget to draw lines to separate the fingers.

In the recesses for the eyes, first add white round parts, then, a little less, black. We make a triangular nose from a brown mass.

Then we sculpt the ears in the form of flattened circles, as well as the tail (sausage, thinning towards one end). At the tip, we also make a triangular brush from a brown mass.

Step 3. We make a mane from a brown mass. It is made in the form of separate petals, which are then attached around the head.

If there is a white and black mass left, you can mix them and make pebbles on which the lion will sit. Grass can be made from green.

We sculpt a panda step by step

Required:

• Mastic white and black;
• Modeling tools;
• A couple of toothpicks.

Step 1. We take a white mass and roll it into a ball. We make indentations for the eyes on it. We sculpt small balls from the black mass, insert them into the recesses and expand them with a stack. Black color should be over the entire area of ​​​​the recesses.

Add a ball of white mass (nose).

Finishing the nose: add a black piece, in which we make a couple of holes with a toothpick or a stack with a sharp tip.

Step 2. From small pieces of black and white mass we make eyes, as well as ears.

The body consists of two parts: a round white and an elongated shape - black. Fasten them with a toothpick.

Step 3. We make paws from black mastic. They should be teardrop shaped. Now on each foot you need to make pads from white mastic.

We sculpt an airplane

You need mastic in two colors: white and blue, as well as a toothpick or a stack for modeling with a sharp tip.

Step 1. We fashion the white trapezoidal body of the aircraft. We add to it the front glass from the blue mass.

Step 2. Sculpt wings. We take a couple of balls, roll them out a little or knead them with our hands. We make triangular wings. We make the tail a little thinner and trapezoidal in shape.

Step 3. Add stripes to the wings, tail, the main part of the blue mastic.

Step 4. We make eyes from white and black mass. We draw a mouth with a toothpick or a stack.

Sometimes, even following step-by-step detailed instructions, not everything and not always turns out. Each craftswoman has a couple of secrets that help in the modeling process:

1. Sometimes it's hard enough to cover the entire cake with mastic neatly. On the side parts, folds appear here and there, which spoil the whole look. In this case, the mastic should be rolled out in such a way that a sufficiently large margin is maintained. Next, we put it on the cake and, under its own weight, it should lie down as it should;
2. It's hard to find black dye. In this case, you can get out of the situation as follows: take three dyes (blue, yellow and red) and mix them in a ratio of 2:1:1. There is also the option of adding blue to brown paint;
3. In order for the mastic coating to shine, it must be lubricated with a solution of vodka and honey. To prepare it, you need to mix both ingredients in equal amounts. Lubricate the surface with the resulting liquid using a soft brush.

Fantasize and, perhaps, you will create your own individual figures from mastic, not like anyone else. Good luck!

Mastic is a sweet plastic substance, from which cooks and confectioners make various decorations for desserts. Complex multi-tiered elements cannot be created immediately, however, even a child can make simple figurines to decorate sweets on the festive table. It is not only easy and fun, but also very tasty. From mastic, you can mold decorations for a wedding cake, heroes of your favorite children's cartoons, lay out simple applications. Below you will find a master class for creating small figures from fondant, which is also suitable for beginners.

Cooks have developed a variety of mastic recipes that are suitable for certain occasions. For example, to create a figurine with an abundance of small details, gelatin-based mastic is well suited. Honey mastic is very soft, does not crumble and does not fall apart. The most common - dairy - is used to fill confectionery, like marzipan. There is also industrial mastic. It is sold in the store and all that a novice cook needs is to start sculpting.

Learning to make figurines from mastic: a master class for beginners

The recipe for making sweet plasticine mass is as follows:

• Powdered milk - 150 g.
• Powdered sugar - 150 g.
• Condensed milk - 200 g.
• Lemon juice - 2 tbsp. l.
• Cognac or flavoring - 1 tsp.

Cooking mastic:

1. Mix powdered sugar and milk powder.
2. Pour into the resulting mixture of condensed milk.
3. Knead the dough by adding lemon juice and flavoring to it.

If desired, you can make colored mastic if you add dye during the kneading process.

Consider how the modeling of figures from mastic takes place step by step. We will give MK for the manufacture of a peanut from a sweet mass.

1. Prepare the mastic according to the recipe described above. To make the peanut more natural, when kneading the dough, you need to add a flesh-colored dye.
2. Let's start with the body. Blind an oval the size of a small chicken egg. With a toothpick, make a hole - the navel at the bottom of the oval.
3. Blind the head by rolling the ball. It can be attached to the body with a toothpick stuck in the body.
4. Let's draw a face. Make eyes with a toothpick, draw a mouth, and instead of a nose, attach a small round ball crushed into a cake.
5. From two small balls make ears, flatten them, giving them the shape of cakes.
6. Now it's the turn of the pens. Roll out the sausages, bend the parts that will be the palms and draw the fingers with a toothpick.
7. Attach the arms to the body. If they do not stick well, then lightly soak the mastic with water at the place of gluing.
8. The peanut is ready. If you wish, you can make legs for him in the same way as the arms (roll up two sausages and separate the fingers with a toothpick).

You can make a toy for the little one with which he will play on your cake or cake. If a child wants to make a girl, it's easy. Weave three thin sausages from mastic, braid them into pigtails and decorate with a mastic bow. Attach the pigtails to the baby's head.

After learning how to make human figures, you can experiment with shapes, colors, and clothing.

We are trying to make a bright and tasty flower from mastic with our own hands

Sweets for adults can be decorated with mastic flowers. If you do not have a suitable dye, use the color mixing scheme.

Let's make a simple rose:

1. Roll out small balls of mastic of the desired color and place them on a cutting board;
2. Flatten the balls to cakes and give them the shape of rose petals, paying special attention to the top edge so that it is thin and wavy;
3. Blind a small drop - this will be the core of the flower;
4. Start attaching the petals to the droplet from smallest to largest, carefully bending the top edges to look more realistic;
5. Having blinded the required number of flowers, they must be allowed to dry for at least a day.

Having molded several figurines from mastic and placing them on the cake, do not forget to decorate with decorative elements: tubes, curls, pigtails. Here are some helpful tips.

• To make the coupling of parts with the cake strong, lubricate the places of the parts with water;
• To make colored elements, it is not necessary to add dye to the dough. You can paint the elements of the finished figure;
• For the test, take well-ground powdered sugar so that the mastic does not tear;
• Instead of food coloring, you can use fruit juices;
• Mastic is stored in the refrigerator for no longer than 2 weeks, in the freezer - 2 months.

Video on the topic of the article

You can see how craftsmen make intricate figures from mastic in this video. Master classes will tell you about other modeling techniques. By repeating after the master, you can also decorate your cake with beautiful sweet creations.

Sculpting figures from mastic as a decoration for a cake is actually as easy as working with plasticine or salt dough (as they taught at school in labor lessons).

At the same time, there are some difficulties in working with fairy-tale characters or little men created in full (cartoon) growth from mastic.

So, when transporting the dessert, there is a chance that the mastic man will collapse and damage or break itself.

For the frame of a mastic man, you can use a thick flower or frame.

As a rule, if we are talking about desserts, and in particular, about cakes, then confectionery masterpieces decorated with figurines and other various decorations immediately pop up in our memory. Previously, only cream was in great demand and popularity. A little later, marzipans began to be used.

Unfortunately, it is simply impossible to create truly exquisite cakes through the use of cream and marzipans. This shortcoming was corrected by the appearance of confectionery mastic in cooking.

In the 16th century, mastic was better known as a glaze, and it was then that it began to be used to create complex and ornaments. Then it was also flexible and elastic, but crumbled when dried, and could not be stored for a long time.

In finished form, the mastic can be stored in a tightly closed state in the refrigerator for about 2 months. If you place the mastic in the freezer immediately after preparation or work, then we will keep the product for almost half a year.

Fondant in its modern form has a long shelf life and affordable flexibility to recreate a wide variety of designs and shapes to decorate desserts.

powdered sugar

wire (flower or frame)

Inventory

pencil

Smooth surface

wire

cutting board

toothpick

How to make a frame for a man figure from mastic with your own hands

To create the frame base of the hero for the cake, you would need to imagine him in real life. The power of thought and wild imagination will not make the correct proportions, so we will use a sketch of the figure from the drawing.

So, let's start making karateka. We have a sketch. Next, take two pieces of wire, and twist them in the middle part between each other.

To properly make the natural curves of the body, we apply our wire frame to, and adjust the karate stance.

When bending the wire, individual parts may be slightly longer than expected. We will not bend the metal, thereby thickening the future figure. We just cut off the excess, and that's it.

If it is worth cutting off excess wire from one leg, then leave the other leg elongated. After all, we will need to somehow fix the little man on the cake - this part will go into the thickness.

It is worth noting: If you are confused by the fact that the wire touches the cake, then dip the tip, which will enter the thickness of the dessert, into hot chocolate and let it grab.

Now we need to adjust the little man. So we put it, bending the fastening part. Slightly pressing from above, we adjust the slope.

The frame of the future karateka must be stable without our help.

When the frame is adjusted, you can take on the wire wrapping with mastic.

We create colored clothes for the body. And we will put the head in place using a simple wooden toothpick.

Now the practically inspired figurine can take its place on the birthday cake. And the frame of the elongated wire coming out of one leg will perfectly keep the athlete on the dessert.

Thanks to the frame base, with figures in any interpretation of movement, it will perfectly reach the point of celebration without losing its aesthetic appearance.